150A
FAST RECOVERY DIODES Stud Version
SD153N/R SERIES
Bulletin I2063/A
Features
High power FAST recovery diode series
1.0 to 1.5 µs recovery time
High voltage ratings up to 1600V
High current capability
Optimized turn on and turn off characteristics
Low forward recovery
Fast and soft reverse recovery
Compression bonded encapsulation
Stud version JEDEC DO-30
Maximum junction temperature 125°C
Typical Applications
Snubber diode for GTO
High voltage free-wheeling diode
Fast recovery rectifier applications
IF(AV) 150 A
@ TC85 °C
IF(RMS) 235 A
IFSM @ 50Hz 4280 A
@ 60Hz 4480 A
I2t@ 50Hz 92 KA2s
@ 60Hz 84 KA2s
VRRM range 400 to 1600 V
trr range 1.0 to 1.5 µs
@ TJ25 °C
TJ- 40 to 125 °C
Parameters SD153N/R Units
Major Ratings and Characteristics
case style
DO-205AC (DO-30)
Next Data SheetIndex
Previous Datasheet
To Order
SD153N/R Series
2222222222222
12
Code
(µs) (A) (A/µs) (V) (µs) (µC) (A)
Test conditions Max. values @ TJ = 125 °C
Recovery Characteristics
typical trr Ipk di/dt Vrtrr Qrr Irr
@ 25% IRRM Square Pulse @ 25% IRRM
TJ = 25 oC
350 25 - 30
S10 1.0 1.6 21 27
S15 1.5 2.3 61 37
Voltage VRRM max. repetitive VRSM , maximum non- IRRM max.
Type number Code peak and off-state voltage repetitive peak voltage TJ = 125°C
V V mA
04 400 500
SD153N/R..S10 08 800 900
10 1000 1100
12 1200 1300
SD153N/R..S15 14 1400 1500
16 1600 1700
ELECTRICAL SPECIFICATIONS
Voltage Ratings
35
IF(AV) Max. average forward current 150 A180° conduction, half sine wave.
@ Case temperature 85 °C
IF(RMS) Max. RMS current 235 ADC @ 74°C case temperature
IFSM Max. peak, one-cycle 4280 t = 10ms No voltage
non-repetitive forward current 4480 t = 8.3ms reapplied
3600 t = 10ms100% VRRM
3770 t = 8.3ms reapplied Sinusoidal half wave,
I2tMaximum I2t for fusing 92 t = 10ms No voltage Initial TJ = TJ max.
84 t = 8.3ms reapplied
65 t = 10ms 100% VRRM
59 t = 8.3ms reapplied
I2√tMaximum I2√t for fusing 916 KA2√st = 0.1 to 10ms, no voltage reapplied
VF(TO)1 Low level of threshold voltage 1.00 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
VF(TO)2High level of threshold voltage 1.46 (I > π x IF(AV)), TJ = TJ max.
rf1 Low level of forward slope resistance 1.35 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
rf2 High level of forward slope resistance 0.52 (I > π x IF(AV)), TJ = TJ max.
VFM Max. forward voltage 1.55 VIpk= 470 A, TJ = 25°C, tp = 400 µs square pulse
Parameter SD153N/R Units Conditions
Forward Conduction
KA2s
A
mΩ
V
To Order
Next Data SheetIndex
Previous Datasheet
SD153N/R Series
Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics
Fig. 3 - Forward Power Loss Characteristics Fig. 4 - Forward Power Loss Characteristics
Fig. 6 - Maximum Non-repetitive Surge CurrentFig. 5 - Maximum Non-repetitive Surge Current
To Order
Next Data SheetIndex
Previous Datasheet
SD153N/R Series
Fig. 8 - Thermal Impedance ZthJC Characteristic
Fig. 7 - Forward Voltage Drop Characteristics
Fig. 9 - Recovery Time Characteristics Fig. 11 - Recovery Current CharacteristicsFig. 10 - Recovery Charge Characteristics
Fig. 14 - Recovery Current Characteristics
Fig. 13 - Recovery Charge Characteristics
Fig. 12 - Recovery Time Characteristics
To Order
Next Data SheetIndex
Previous Datasheet
SD153N/R Series
23
TJMax. operating temperature range -40 to 125
Tstg Max. storage temperature range -40 to 150
RthJC Max. thermal resistance, junction to case 0.16 DC operation
RthCS Max. thermal resistance, case to heatsink 0.10 Mounting surface, smooth, flat and greased
TMounting torque ± 10% 15.5 Not lubricated threads
13.5 Lubricated threads
wt Approximate weight 120 g
Case style DO-205AC (DO-30) See Outline Table
Parameter SD153N/R Units Conditions
°C
Thermal and Mechanical Specification
K/W
Nm
∆RthJC Conduction
(The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC)
1-Diode
2-Essential part number
3-3=Fast recovery
4-N=Stud Normal Polarity (Cathode to Stud)
R=Stud Reverse Polarity (Anode to Stud)
5-Voltage code: Code x 100 = VRRM (see Voltage Ratings table)
6-trr code (see Recovery Characteristics table)
7-P=Stud base DO-205AC (DO-30) 1/2" 20UNF-2A
M=Stud base DO-205AC (DO-30) M12 X 1.75
8-7B=Flag top terminals (for Cathode/ Anode Leads)
S=Isolated lead with silicone sleeve
(Red = Reverse Polarity; Blue = Normal Polarity)
None = Not isolated lead
9-V=Glass-metal seal
51 2 34
SD 15 3 R16 S15 PBV
7
68 9
Device Code
Ordering Information Table
180° 0.011 0.012 TJ = TJ max.
120°0.016 0.019
90°0.021 0.023 K/W
60°0.029 0.030
30° 0.041 0.041
Conduction angle Sinusoidal conduction Rectangular conduction Units Conditions
To Order
Next Data SheetIndex
Previous Datasheet
SD153N/R Series
2222222222222
12
Outline Table
DO-205AC (DO-30) Flag
All dimensions in millimeters (inches)
Conforms to JEDEC DO-205AC (DO-30)
All dimensions in millimeters (inches)
GLASS-METAL SEAL
MAX.
21 (0.82)
M AX.
16.5 (0.65)
6.5 (0.26) MIN .
DIA. 8.5 (0.33) NOM.
15 7 (6 .18)
55 (2 .16) MIN .
DIA. 23.5 (0.93) MAX.
24 (0.94)
M AX.
SW 27
* FOR METRIC DEVICE: M12 X 1.75
17 0 (6.69)
1/2"-20UNF-2A*
1 2.5 (0.4 9)
M AX.
C.S. 16mm
2.6 (0.10) MAX.
2
35 (1.38)
MAX .
(0.015 s.i.)
M AX .
GLASS-METAL SEAL
MAX.
21 (0.82)
MAX.
DIA. 23.5 (0.93) MAX.
24 (0 .94)
12.5 (0.49)
16.5 (0.65)
5.6 (0.22) DIA. 5.54 (0.22)
2.4 (0.09)
27 (1.06)
41 (1.61) M AX.
9.5 (0.37)
*FOR METRIC DEVICE. M12 X 1.75
36.5 (1.44)
1/2"-20UNF-2A*
To Order
Next Data SheetIndex
Previous Datasheet
