PRODUCT DATASHEET Florence series last update 26/1/2017 Product number F14344_FLORENCE-1R-ZT25 Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Florence Lens CALGD0414-M8W1 Clear 19.5 x 286 mm 7.13 mm Rectang PMMA ["glue"] Production ready Product number F14487_FLORENCE-1R-MAXI-WG Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Florence Lens CALGD0414-M8W1 Clear 21.65 x 286 mm 11.04 mm Rectang PMMA "" Production ready Product number C14530_FLORENCE-1R-Z2T25 Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Florence Lens CALGD0414-M8W1 Clear 19.5 x 286 mm 6.4 mm Rectang PMMA Production ready Product number C14642_FLORENCE-1R-UP Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Florence Lens CALGD0414-M8W1 Clear 285.6 x 19.51 mm 6.91 mm Rectang PMMA ["clips"] Production ready FWHM Efficiency cd/lm Gerber File FWHM Efficiency cd/lm Gerber File Asymmetric degrees 94 % 0.940 Available Asymmetric degrees 92 % 1.050 Available FWHM Efficiency cd/lm Gerber File Asymmetric degrees 88 % 0.460 Available FWHM Efficiency cd/lm Gerber File Asymmetric degrees 90 % 0.370 Available April 9th 2018 12:16 Copyright Ledil Oy - Subject to change without prior notice - Page 1/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 PRODUCT DATASHEET Florence series last update 26/1/2017 Product number F14468_FLORENCE-1R-Z60 Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Florence Lens CALGD0414-M8W1 Clear 19.5 x 286 mm 7.55 mm Rectang PMMA ["clips"] Production ready Product number F14304_FLORENCE-1R-Z90 Family Type LED Color Diameter Height Style Optic Material Holder Material Fastening Status Florence Lens CALGD0414-M8W1 Clear 19.5 x 286 mm 7 mm Rectang PMMA ["clips"] Production ready FWHM Efficiency cd/lm Gerber File 58+121 degrees 94 % 0.550 Available FWHM Efficiency cd/lm Gerber File 89+115 degrees 93 % 0.380 Available NOTE: The typical divergence will be changed by different color, chip size and chip position tolerance. The typical total divergence is the full angle measured where the luminous intensity is half of the peak value. April 9th 2018 12:16 Copyright Ledil Oy - Subject to change without prior notice - Page 2/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 PRODUCT DATASHEET Florence series last update 26/1/2017 GENERAL INFORMATION - Product series especially designed & optimized for CALGD0414-M8W1 series of LEDs. - Special care taken to make light distribution as uniform as possible. - Lens material optical grade PMMA with high UV and temperature resistance. Allows use of high current and temperature conditions. Please find more information about used material from below: http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20UL94_Yellow%20Card.pdf http://ledil.fi/sites/default/files/Documents/Technical/Material/PMMA%208N%20PLEXIGLAS-Datasheet.pdf April 9th 2018 12:16 Copyright Ledil Oy - Subject to change without prior notice - Page 3/3 Ledil Oy Salorankatu 10 24240 SALO Finland http://www.ledil.com email: ledil@ledil.com FAX: +358-2-733 8001 A B C D E F G H 11.04 4 95 5.41 23.4 approximate length of single optic Left view 95.33 c/c LED LINE in part center Asymmetric light direction shown by arrow(s). 95.33 c/c 3 Cover max level = lens top level to avoid blocking light from the wall. Wall typical fixture Highly recommended to cover wallside wire outlet with light fixture to avoid reflections from components. 5.5-10.5 from pcb top 2 Optics can be snapped along this line and used also as single parts. 3.19 1 10.83 1 Tolerances if not otherwise shown According to DIN ISO 2768-1 Linear measures: class M According to DIN ISO 2768-2 Form and position: class L This drawing is the property of LEDiL Oy. It may not be reproduced, copied or communicated without a written agreement with LEDiL Oy. G C14487 DESCRIPTION FLORENCE-1R-MAXI-WG MATERIAL COLOUR PMMA clear Ledil Oy Salorankatu 10 FIN 24240 SALO Finland DRAWING TITLE C14487_FLORENCE-1R-MAXI-WG SIZE 1 PART NUMBER A3 SCALE H 2 INDEX PART NO THIRD ANGLE PROJECTION: 10.83 wall side typical Top view 100-200mm 10.83 21.65 10.83 4.57 4 3 285.6 C14487 1:1 WEIGHT SHEET B A 1/1