SMS Bauform / Size : 2512 ISA-PLAN(R) - SMD Prazisionswiderstande / SMD precision resistors Technische Daten / technical data Widerstandswerte Resistance values 3 mOhm - 2 Ohm Toleranz Tolerance 0.5 %, 1 %, 2 %, 5 % Temperaturkoeffizient(MANGANIN ) Temperature coefficient (tcr) < 50 ppm/K ( 20 C to 60 C ) Temperaturbereich Applicable temperature range -55 C to +170 C Belastbarkeit Load capacity 3W Innerer Warmewiderstand (Rthi) Internal heat resistance (Rthi) 20 K/W* Isolationsspannung Dielectric withstanding voltage 200 V Induktivitat Inductance < 3 nH (R) * Stabilitat (Nennlast) Abweichung TK= Kontaktstellentemperatur Stability (nominal load) deviation TK= Terminal temperature < 0.5 % nach/after 2000 h (T = 80 C) K < 1.0 % nach/after 2000 h (T = 110 C) K *= fur R 25 mOhm Merkmale / features * * 3 Watt Dauerleistung bei 110 C 3 Watt permanent power at 110 C * * Dauerstrome bis 30 A ( 3 mOhm ) Constant current up to 30 A ( 3 mOhm ) * * Sehr hohe Pulsbelastbarkeit High pulse power rating * * Sehr gute Langzeitstabilitat Excellent long term stability * * Bauteilemontage: Reflow-, und IR-Loten Mounting: reflow- and infrared soldering Bauform/Size 2512 Applikationen / application * * Messwiderstand fur Leistungshybride Current sensor for power hybrid applications * * Steuergerate in der Automobiltechnik Control systems for the automotive market * Leistungsmodule * Power modules * Frequenzumrichter * frequency converters * * Schaltnetzteile Switch mode power supplies Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite-You can always find the current valid issue of data sheet on our homepage Ausgabe / Issue SMS-2009-08-28 e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de www.isa-asic.de /4 SMS Bauform / Size : 2512 TK, Lastminderung und Langzeitstabilitat / TCR, power derating and long term stability Temperaturabhangigkeit des elektrischen Widerstandes von MANGANIN(R)-Widerstanden Temperature dependence of the electrical resistance of MANGANIN(R)-resistors Grenzkurve Limiting curve Typische Temperaturabhangigkeit eines SMS Widerstandes Typical temperature dependence of a SMS resistor Grenzkurve Limiting curve Lastminderungskurve Power derating curve Stabilitat/Stability <1 % Verbesserte Stabilitat/Improved stablilty < 0.5 % Langzeitstabilitat von MANGANIN(R)-Widerstanden bei 140 C Long term stability of MANGANIN(R)-resistors at 140 C Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite-You can always find the current valid issue of data sheet on our homepage Ausgabe / Issue SMS-2009-08-28 e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de www.isa-asic.de /4 SMS Bauform / Size : 2512 Vorschlag fur Leiterplatten Layout (Reflowloten) Proposal for pcb-layout (reflow soldering) Lotprofil Vorschlag / Recommended solder profile Reflow-, IR-loten Reflow, infrared soldering Temperatur 260 C 255 C 217 C Zeit (s) peak 40 90 RoHS 2002/95/EG konform seit Produktstart. Ausfuhrliche Informationen erhalten Sie auf unserer Homepage: www.isabellenhuette.de RoHS 2002/95/EC compliance since product launch. For more information please visit our website: www.isabellenhuette.de Ein leichte Verformung beim Loten beeinflusst nicht die technischen Eigenschaften des Bauteils. Slight deformations during soldering do not affect technical properties of the component. Gurtinformationen TAPE & REEL INFORMATION Norm / Specification DIN EN 60286-3 Gurtbreite / Tape width 12 mm Anzahl Bauteile/Parts per reel 5000 Bestellbezeichnung / ordering code SMS-R005-1.0 Typ Widerstandswert Toleranz Type Resistance value Tolerance SMS 5 mOhm 1.0 % Gewahrleistung Alle Angaben uber Eignung, Verarbeitung und Anwendung unserer Produkte, technische Beratung und sonstige Angaben erfolgen nach bestem Wissen, befreien den Kaufer jedoch nicht von eigenen Prufungen und Versuchen. Warranty All information regarding the suitable, workability and applicability of our products, all technical advice and other information are provided to the best of our knowledge and belief, but shall not discharge the buyer from his own examinations and tests. Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite-You can always find the current valid issue of data sheet on our homepage Ausgabe / Issue SMS-2009-08-28 e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de www.isa-asic.de /4 SMS Bauform / Size : 2512 Grenzkurve fur maximale Pulsenergie bzw. Pulsleistung fur Dauerbetrieb Maximum puls energy resp. pulse power for continous operation 10000 1000 Die dargestellte Kurve gilt fur den Widerstandswert R005. Fur andere Werte kann die Kurve im unteren Bereich ggf. anders verlaufen, so dass in Grenzbereichen eine separate Qualifikation erfolgen sollte. This curve is only valid for the resistance value R005. The shape of the curve in the range below 0.1 sec will be different for other resistance values. Therefore a separate qualification should be made for pulse power close to the above curve. Spezifikation/Specification Parameters Test Conditions Specification Typical data Maximum Temperature for full power operation 95 C 95 C 95 C Working Temperature -55 to 170 C -55 to 170 C -55 to 170 C Thermal Shock MIL-STD-202 method 107-B1 0.1 % 0.1 % Overload MIL-R-26E (5 times rated power, 5 sec) 0.2 % 0.2 % Solderability MIL-STD-202 method 208 > 95 % coverage > 95 % coverage Resistance to Solvents MIL-STD-202 method 215, 2.1a, 2.1d no damage no damage Low Temperature Storage and Operation MIL-STD-26E 0.1 % 0.05 % Resistance to Soldering Heat MIL-STD-202 method 210 0.1 % 0.05 % Moisture Resistance MIL-STD-202 method 106 0.1 % 0.05 % Shock MIL-STD-202 method 213-A 0.2 % 0.1 % Vibration, High Frequency MIL-STD-202 method 204-B 0.2 % 0.1 % Life MIL-STD-26E 0.2 % 0.2 % Storage Life at Elevated Temperature MIL-STD-202 method 108-F 0.3 % 0.3 % High Temperature Exposure 140 C, 2000 h 0.2% 0.2% Current Noise MIL-STD-202 method 308 0.01 % 0.01 % Voltage Coefficient (%/V) MIL-STD-202 method 309 linearity error less than 120dB linearity error less than 120dB Resistance Temperature Characteristic MIL-STD-202 method 304 (20-60C) <50 ppm/K <30 ppm/K Thermal EMF 0 - 100 C 2 V/ K max. 2 V/ K Frequency Characteristic R< 25 mOhm inductivity < 3 nH < 1 nH Den aktuellen Stand des Datenblattes finden Sie auf unserer Internetseite-You can always find the current valid issue of data sheet on our homepage Ausgabe / Issue SMS-2009-08-28 e-mail: sales.components@isabellenhuette.de - Internet: www.isabellenhuette.de www.isa-asic.de Isabellenhutte Heusler GmbH & Co. KG Eibacher Weg 3-5 - D-35683 Dillenburg - Telefon / Phone +49 (0) 27 71 9 34 - 0 - Fax: +49 (0) 27 71 2 30 30 /4