Silicon Bridge Rectifier Features: * * * * Glass, Passivated Chip Junctions High Surge Overload Rating: 35A Peak Saves Space on Printed Circuit Boards High Temperature Soldering Guaranteed: 260C/10 seconds at 5lbs. (2.3kg) tension Mechanical Data: * * * * * Case: Molded Plastic Body over Passivated Junctions Terminals: Plated Leads Solderable per MIL-STD-750, Method 2026 Polarity : Polarity Symbols Marked on Body Dimensions in Inches and (Millimeters) Mounting Position : Any Weight: 0.0078oz, 0.22g Maximum Ratings And Electrical Characteristics: Ratings at 25C ambient temperature unless otherwise specified. Single phase, half wave,60Hz, resistive or inductive load. For capacitive load, derate by 20%. Characteristics Symbol HD04-T Units Peak repetitive reverse voltage VRRM 400 V RMS reverse voltage VRMS 280 V DC blocking voltage V DC 400 V Maximum average forward output current at TA=25C IF(AV) 0.8 A Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load IFSM 35 A Maximum instantaneous forward voltage at 0.8A VF 1 V Maximum reverse current at TA=25C at rated DC blocking voltage at TA=100C IR 5 0.5 A mA Typical junction capacitance per leg (Note 3) CJ 13 pF RJA RJL 85 20 C/W TJ, TSTG - 55 to +150 C Typical thermal resistance per leg (Note 1) (Note 2) Storage and Operating junction temperature range Notes: (1) On glass epoxy PCB mounted on 0.05 x 0.05 (1.3mm x 1.3mm) pads. (2) On aluminium substrate PCB with an area of 0.8 x 0.8 (20mm x 20mm) mounted on 0.05 x 0.05 (1.3mm x 1.3mm) solder pad. (3) Measured at 1MHz and applied reverse voltage of 4V. www.element14.com www.farnell.com www.newark.com Page <1> 28/02/13 V1.0 Silicon Bridge Rectifier www.element14.com www.farnell.com www.newark.com Page <2> 28/02/13 V1.0 Silicon Bridge Rectifier MBS Package Outline: Dim. Min. Max. A 4.4 4.8 B 3.4 3.8 C 2.35 2.65 D 6.5 7 E 0.15 0.35 F 0.9 1.5 G 0.2 Max. H 2.5 2.8 I 0.5 0.8 K 2.3 2.7 Dimensions : Millimetres Package Information: Part Number Table Device Package Shipping Description Part Number HD04-T MBS 3,000 / Tape & Reel Silicon Bridge Rectifier HD04-T Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. (c) Premier Farnell plc 2012. www.element14.com www.farnell.com www.newark.com Page <3> 28/02/13 V1.0