z Tyco Electronics High Speed Backplane Connectors Table of Contents Z-PACK HS3 Connector ............0 0.0.00 cece eee eee nees 95-136 Product Line Overview .. 2... 0.0.00. ccc eee ee een ete ene 96-98 Part Number Selection Chart .......0. 0.0000 cece ee eens 99, 100 6 Row Connectors 2... ee eee eee eens 101-112 10 Row Connectors .. 0... een eens 113-126 Coding Keys (10 Row Only) ............2.0. 00 eee eee eee 127 Power and Guide Hardware ....... 0.0... cee eee te tee eee 127-133 Mating Sequence Chart .. 00... nett eee eee 134 Application Tooling and Equipment .. 0.0.0.0... 0. ce ee ee ene 135 Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 JO}BUUOD ESH HOVd-Z96 z Tyco Electronics High Speed Backplane Connectors Product Line Overview Product Facts m High speed, high density two piece board-to-board backplane connector w Dual beam provides redundant contact for improved reliability = For data rates of 6.2+ Gb/s = 10 row, 100 high speed lines per 25.00 [.984] m 6 row, 60 high speed lines per 25.00 [.984] = Controlled impedance: 50 ohm Single Ended 100 ohm Differential w Feedthrough versions for midplane applications m 250 mating cycles mw End stackable on 2.50 [.098] centerline, signal pin to signal pin mw Advanced ESD/Power (10 Amps) using optional guide pins and power contacts Applications w High Speed Telecommunications Equipment = Mid-range and high-end services m Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 Ww IGES is a trademark of IAMBA Networks, Inc. PRO/E is a trademark of Parametric Technology Corp. Z-PACK HS3 Connector (Continued) The emergence of high speed serial backplanes has forced interconnections to be able to transfer data at gigabit speeds. The 7-PACK HS3 connector system has been specifi- cally designed to support this generation of high speed serial data transfer. Tyco Electronics has incor- porated a controlled imped- ance microstrip path through the connector to minimize signal degradation and Availability crosstalk. Compliant pins are used on both daughter- card and backplane. This connector family is press fit and is compatible with other 7-PACK HM family connectors on the same board edge. Z-PACK HS3 connectors support data rates of 6.2+ Gb/s per differential pair. The 6 row version is optimized for 20.32mm or 0.8 inch card centerline applications, while the 10 row version is optimized for high density for 25.4mm or 1.0 inch card centerline applications. The Tyco Electronics Univer- sal Power Module (UPM) is designed to be compatible with the 7-PACK HS3 con- nector. Static Discharge Guide/ Power Pins, Guide Pin/ Power Receptacles, Univer- sal Guide Pin and Recepta- cles, and Coding Keys (10 row only) are also available. Fully validated SPICE models: E-mail requests to modeling@tycoelectronics.com Samples: go to http://tycoelectronics.custhelp.com Pro/E models and IGES models: E-mail requests to TycoCAD@tycoelectronics.com White Papers: available on product website at http://hs3.tycoelectronics.com Electrical Performance Report: http://hs3.tycoelectronics.com http://hs3.tycoelectronics.com Technical Documents Product Specification 108-1957 Application Specification 114-13020 Qualification Test Report 501-501 6 row EPR #138505; 10 row EPR #138506 Routing Guide: http://hs3.tycoelectronics.com Routing Guide #20GC017 Material and Finish Contact Area Finish 0.80,m Au min. over 1.3um Ni min. Compliant Pin Finish 0.8m SnPb min. over 1.3um Ni min. Contact Copper Alloy Housing Glass filled polyester, 94V- 0 rated Ratings Current 1.15A per fully energized Operating Voltage 250 VAC max. Temperature -65C to 105C Mating Force 0.75N max. per contact (signal = 1 contact, ground = 1 contact) Durability 250 cycles Reference Product Spec. 108-1957 for complete list of performance data. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. to change. Dimensions are shown for reference purposes only. Specifications subject USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 CG. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Performance Specifications | Asynchronous Diff. NEXT (%) Electrical Characteristics HS3 10-Row Measured Noise Totals = 5, Characteristic Impedance Feige rate 20-80% 50ps_100ps_150ps_ 250 ps 100 + 10% Ohms BC Pair Total NEXT 2.3% 1.9% 1.7% 1.3% Nominal Resistance 21 mOhm DE Pair Total NEXT 4.0% 3.3% 3.0% 24% Crosstalk __ See table at right FG Pair Total NEXT 4.0% 3.4% 3.1% 2.7% HJ Pair Total NEXT 2.3% 1.9% 1.7% 1.5% Insertion Loss See chart below Synchronous Diff. NEXT (%) HS3 10-Row Measured Noise Totals Edge rate 20-80% 50 ps 100 ps 150 ps 250 ps BC Pair Total FEXT 0.5% 0.3% 0.3% 0.2% DE Pair Total FEXT 1.5% 0.8% 0.5% 0.5% FG Pair Total FEXT 1.4% 0.8% 0.7% 0.5% HJ Pair Total FEXT 1.0% 0.6% 0.4% 0.3% Edge rates specified are at the connector. Noise includes 1.60 [.063] footprints on both sides of the connector. Totals include contributions from 8 adjacent aggressor pairs. Eile Control Setup Measure Calibrate Utilities Help 25 Jan 2005 14:34 = PRBS 2-1 data pattern 10 Gb/s data rate BC Pair 64% Eye Opening 12.6ps Jitter (Markers) 100 midi Ya my 100 mivdiv ) 99 100mivediv 00 mivediv y Time: 16Apseiy Trig: Patter Patan itn 3) 200.0 mv 2 Delay-40 2393 ne | GD Bit: 114 af 12.0 be------- 15.0 --------- Magnitude (dB) 18.0 }--------- *21.0 }--------- -24,0 f--------- wopeeee o = & |---- o oY o 0.0 2.0 4.0 6.0 8.0 Frequency (GHz) = o SDD21 B2c2 SDD21 D2E2 SDD21 F2G2 === SDD21 H2J2 Calibrated to include only the connector and the 1.60 [.063] footprints on both sides of the connector. Note: All part numbers are RoHS compliant. 97 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 CG. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Catalog 1773095 Revised 12-08 www.tycoelectronics.com J0}ISUUOD ESH MOVd-Z98 Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Z-PACK HS3 Connector: Printed Circuit Design Rules for Backplane Routing Using Standard Commer- cial Design Rules This table lists routing specifications which meet design rules practiced by most printed circuit board vendors. This table should be used fo route the Z-PACK HS3 connector for most ap- plications and especially under one or more of these considerations: 1. Edge rates require the widest conductors possible. 2. Backplanes having layer counts above 16 3. Backplanes which exceed 508mm (20") in length or width. 4. Cost is a major factor. Using Advanced Design Rules This table lists routing specifications which can be built by a limited number of leading edge printed circuit vendors using advanced design rules. This table can be used as a reference for Z-PACK HS3 connector in backplane ap- plications where very high density is a major factor. The PCB vendor should be consulted regarding applicability of these rules to a specific design. Con- sideration should be given to the follow- ing: 1. Signal layer count reduction is possible with these design rules. 2. Backplanes which exceed 508mm (20") in length or width generally cannot be built with these rules, 3. Cost factors can potentially be higher. Z-PACK HS3 Connector Routing Pattern For more details request Report #20GC004-1 or visit http://www.tycoelectronics.com/ products/simulation/files/ papers/20GC004_1.pdf Finished Drilled Pad Dia Annular Pad-Pad Spacin Conductor Routing Options Hole Dia. Hole Dia. . Ring 63 mils (1.58mm) C/C 5 milspacing 6 mil spacing 24 mils 28 mils 44 mils 2 mils 19 mils 9 mils 7 mils 0.6mm 0.7mm 1.4mm 0.05mm 0.475mm 0.225mm 0.175mm 24 mils 28 mils 42 mils 1 mil 21 mils 11 mils 9 mils 0.6mm 0.7mm 1.05mm 0.025mm 0.525mm 0.275mm 0.225mm 24 mils 28 mils 40 mils tangency 23 mils 13 mils 11 mils 0.6mm 0.7mm 1.0mm tangency 0.575mm 0.325mm 0.275mm Commercial Design Rules: Minimum pad diameter for tangency: Drill Diameter (D)+12 mils (0.3mm) Hole location tolerance: +/- 3 mils (0.075mm) Pad/Pad artwork tolerance: +/- 2 mils (0.05mm) Feature tolerance (1 oz foil): +/- 0.075 mils (0.0175mm) Finished Drilled Pad Dia, Annular _ Pad-Pad Spacing Conductor Routing Options Hole Dia. Hole Dia. . Ring 63 mil (1.58mm) C/C 5 milspacing 6 mil spacing 24 mils 28 mils 38 mils tangency 25 mils 15 mils 13 mils 0.6mm 0.7mm 0.95mm tangency 0.625mm 0.35mm 0.3mm Two Conductor Routing 24 mils 28 mils 42 mils 2 mils 21 mils 4.5 mil lines/4 mil spacing 0.6mm 0.7mm 1.05mm 0.05mm 0.525mm 0.11mm lines/0.09mm spacing 24 mils 28 mils 40 mils 1 mil 23 mils 5.5 mil lines/4 mil spacing 0.6mm 0.7mm 1.0mm 0.025mm 0.575mm 0.125mm lines/0.1mm spacing Advanced Design Rules: Minimum pad diameter for tangency: Drill Diameter (D)+10 mils (0.25mm) Hole location tolerance: +/- 2 mils (0.05mm) Pad/Pad artwork tolerance: +/- 2 mils (0.05mm) Feature tolerance (1 oz foil): +/- 0.075 mils (0.0175mm) @ till Dia. i 0.7mm < (28 mils) = xf = 1.41 mm (56 mils) o 0.51mm (20 mils) eo 4 e { 041mm . (16 mils) 24 mil finished hole +18 mil (42 mil) pad Option A: 10 mil traces 5 mil spaces Option B: 8 mil traces 6 mil spaces 24 mil finished hole +14 mil (38 mil) pad ~ Option A: ( 12 mil traces 6 mil spaces Option B: 8 mil traces 8 mil spaces O.91mm (36 mils) Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Part Number Selection Chart 10 Row Z-PACK HS3 Connector ee oy 5 fone o0cR RT Part Number 5120874 50 Position Right Receptacle Univ Pwr Guide Pin Ii Part Number 5120792 50 Position Right Receptacle ESD/HDI Guide Pin Taitntttnitt Part Number 5120790 100 Position Center Receptacle GRIStaveuS. Trav trnitt Part Number 5120791 50 Position Center Receptacle Part Number 5120793 50 Position Lett Receptacle ESD/HDI Guide Pin Thi T Part Number 5120875 50 Position Lett Receptacle Univ Pwr Guide Pin 50 Position Right Header Univ Pwr Guide Pin Part Number 5120661 50 Position Right Header ESD/HDI Guide Pin Part Number 5120658 100 Position Center Header Part Number 5120747 50 Position Center Header Part Number 5120662 50 Position Left Header ESD/HDI Guide Pin Part Number 5120672 50 Position Left Header Univ Pwr Guide Pin Part Number 5120665 50 Position Right Feed-Through ESD/HDI Guide Pin Part Number 5120664 100 Position Center Feed-Through Part Number 5120748 50 Position Center Feed-Through Part Number 5120666 50 Position Left Feed-Through ESD/HDI Guide Pin Part Number 5120667 50 Position Right Shroud ESD/HD! Guide Pin ea eee Part Number 5120663 100 Position Center Shroud Part Number 5120750 50 Position Center Shroud Part Number 5120668 50 Position Left Shroud ESD/HD! Guide Pin Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. Catalog 1773095 Revised 12-08 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets www.tycoelectronics.com are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 CG. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 99 J0}ISUUOD ESH MOVd-Zz Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Part Number Selection Chart 6 Row Z-PACK HS3 Connector Part Number 5120788 30 Position Right Receptacle Part Number 5120786 60 Position Center Receptacle Part Number 5120787 30 Position Center Receptacle Part Number 5120789 30 Position Left Receptacle 100 1 iJ a Part Number 5120677 30 Position Right Header Part Number 5120674 60 Position Center Header Part Number 5120732 30 Position Center Header ee Part Number 5120678 30 Position Left Header Part Number 5120680 30 Position Right Header Feed-Through Part Number 5120683 30 Position Right Shroud Part Number 120949-1 60 Position Receptacle with Guide Module Part Number 5120679 60 Position Center Header Feed-Through Part Number 5120742 30 Position Center Header Feed-Through Part Number 5120681 30 Position Left Header Feed-Through Part Number 5120682 60 Position Center Shroud Part Number 5120743 30 Position Center Shroud Part Number 5120684 30 Position Left Shroud Part Number 120948-1 90 Position Receptacle Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 CG. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Right Angle Receptacle 6 Row, Left Module (ac- cepts ESD Guide Pin) PCPS P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 ta 0 Note: For finishes other than Tin-Lead, reference Applica- tion Specification 114-13020. Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through ex- emption for lead in press-fit connectors. Recommended PC Board Layout (Component Side Shown) 21.67 - =| 1.00 (855) j.039) "YP 13.18 * 30 12.00 14.10 | + .O07. [180] Late 907) (472) 1.585] 150 5) 2) Le 1375] | Distance From Row a [.059] YP. to Board Surface 1.00 i 4.05 [.039] YP [159] YP: 2.00 |. 10.80 078] YP L425] YP: | i Hl 8 ll & A Le LT LOLA 123 4 54 _ Location Ref. Pin Header Assemblies Number of Part Application Tooling Positions Number insertion ISSheet HsgRemoval ISSheet ChicletRemoval |S Sheet 30 5120789-1 1338742-1 408-8394 1338744-1 408-8393 1338745-1 408-8410 10.00 Typ 2.50 [.394] .098)"? 5.75 2 1.25 | 7 [.226] l | [.o4g) | YP @ 2.50 [.098] Finished Size Optional Power Contact , 1.00 yD 010mm P/N 535875-x [039] """ 3.50 1 5 | L138] /P- 550 \ + 6 $6! 4-1 [.217] rote tet eters i | @ 6 d ttre Ree oo" oa 7.00 2.00 (.276) "YP: [.o79] "7" 104 Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 JO}BUUOD ESH HOVd-Z102 z Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Right Angle Receptacle (Continued) 6 Row, Center Module 21.67 - > 1.00 i.03g) TYP 13.18 * 038 12.00 14.10 [518 903) 1 [472] [.555] [.078] 1.50 | 1.82 Distance From Row a [.059] Typ. [.072] to Board Surface 4.05 159] YP Location N Pin Header Assemblies Number of Dimensions Part Application Tooling Positions A B Cc Number Insertion ISSheet | _Hsg Removal ISSheet _ Chiclet Removal IS Sheet 24.88 22.50 25.40 60 "980 BBG {09 9 120786-1 1338742-2 = 408-8394 1338744-1 408-8393 1338745-1 408-8410 12.38 10.00 12.90 30 487 304 508 5120787-1 1338742-1 408-8394 1338744-1 408-8393 1338745-1 408-8410 P.C.B. Hole Dimensions rea0) TY} Drilled Hole 0.7:-0.025mm "252 np Fin. Hole 0.55 to 0.65mm | = (ag) YP: Cu-thickness 0,025 to 0.050mm | 4.00 SnPb-thickness 0.004 to 0.010mm | 1 [.039] 9 5, 50. 138 sor eteretetetet er! ree Note: For finishes other than eH $, z, 3, q. a3 te ts t rr Tin-Lead, reference Applica- at +" z 535 a $e tt te Y tion Specification 114-13020. 6 Note: All part numbers are RoHS a Typ. compliant. Tin-Lead parts are (o79iRet [276] RoHS compliant through ex- emption for lead in press-fit connectors. Recommended PC Board Layout (Component Side Shown) Dimensions are in millimeters Catalog 1773095 Revised 12-08 www.tycoelectronics.com and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Right Angle Receptacle (Continued) 6 Row, Right Module (accepts ESD Guide Pin) P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than Tin-Lead, reference Applica- tion Specification 114-13020. Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through ex- emption for lead in press-fit Co All UPA | 13.21 [.520] . 21.62 . [851] 21.57 [.849] 10.00 5.75 | 1.00 [.393] [.226] 250 T . [039] YP [098] Typ. ~ 2.00 | F .07a) YP 4 0.20 13.18 * 9:09 12.00 14.10 450 518 +907) [472] [555] L059) | : , | | _ C_ 4,58 X\ [.180] 1.50 ~ *| 2.00 T .059) |Y? [.078] 4.05 Typ. f Distance From Row a (159) 7P to Board Surface Jo LS r : to | 123465 Location Ref Pin Header Assemblies Number of Part Application Tooling Positions Number insertion ISSheet Hsg Removal ISSheet Chiclet Removal |S Sheet 30 5120788-1 1338742-1 408-8394 1338744-1 408-8393 1338745-1 408-8410 15.75 [.620] | 10.00 7 2.50 5 1.394] [.098] ve 1.25 [.04g] TYP 1.00 @ 2.50 [.098] Finished Size vem TYP. Optional Power Contact 59___ $0391 / PIN 535875-x Liza": | 5.50 ; [217] ' 7.00 [276] TYP. 2.00 L079] Ref. Recommended PC Board Layout connectors. (Component Side Shown) Catalog 1773095 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 12-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 103 JO}BUUOD ESH HOVd-Z104 z Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Vertical Receptacle 6 Row, 90 Position Location Ref. 2 3 4 Number of Part Application Tooling Positions Number insertion ISSheet Hsg Removal ISSheet Chiclet Removal |S Sheet 90 120948-1 1725624-1 408-8870 = - P.C.B. Hole Dimensions (37a) 0P- 20 | Drilled Hole 0.70.025mm .098) 'YP 7 Fin. Hole 0.55 to 0.65mm re cag) YP Cu-thickness 0.025 to 0.050mm 1.00, SnPh-thickness 0.004 to 0.010mm 1 | 15 [039]. 3 59 We. stetetutetetetetetatetetetytete! ws . . ote + e } Note: Te Laadl referenoe Applica: ? st it wa? it SEEEe res a : en aw Se = c tion Specification Rh htt 114-13020. Serer yty terete ty tetera te tg tet ea oh Note: All part numbers are RoHS 2.00 L276] YP: compliant. Tin-Lead parts are RoHS compliant through ex- emption for lead in press-fit connectors. Lozg]*eF Recommended PC Board Layout (Component Side Shown) Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Vertical Receptacle (Continued) 6 Row, 60 Position, with Guide Module Z-PACK HS3 Connector (Continued) ~~ 7po ot pw Location Ref. Ui Lon aL Al = 23 4 5 6 7 B cll 9 10 Number of Part Application Tooling Positions Number insertion ISSheet Hsg Removal ISSheet Chiclet Removal |S Sheet 60 120949-1 1725623-1 408-8870 _ _ _ _ P.C.B. Hole Dimensions 22.50 | ____= [86] 7 Pe 50 Drilled Hole 0.7+0.025mm L 250 ap, + Fin. Hole 0.55 to 0.65mm | coag DP: Cu-thickness 0.025 to 0.050mm | +00 S$nPb-thickness 0.004 to 0.010mm | [.039'P 3.50. 1 10 | L 139) ereret et grater ere tet Note: For finishes other than t t t t -e } m Tin-Lead, reference Applica- eg rE d tion Specification | t t t t t t t c 1144-13020. ate te tater tetote tee 5 ! Note: All part numbers are RoHS t 7.00 J, compliant. Tin-Lead parts are 2.00 (276) RoHS compliant through ex- Lo7ay"* emption for lead in press-fit Recommended PC Board Layout connectors. (Component Side Shown) Catalog 1773095 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 12-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are U.S. equivalents. to change. CG. America: 52-55-1106-0803 UK: 44-8706-080-208 105 JO}BUUOD ESH HOVd-Zz Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Vertical Pin Header Assemblies 6 Row, Left Module (accepts ESD Guide Pin) P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than Tin-Lead, reference Applica- tion Specification 114-13020. Pin Header Assemblies 11.80 + 0.18 | l [.464 + 007] J aS Pere ~ B | Application Tooling Number of Dimensions Pin Part ; F ta Oo Signal Pin Ground Blade Positions Ref. Numbers i A B D E Seating _ IS Sheet Repair Kit IS Sheet Repair Kit IS Sheet 13.70 10.00 14.80 8.20 3.70 539 393 583 322 145 A 5120678-1 91313-1 408-4546 354687-2 408-9979 1320534-1 408-4573 13.70 10.00 14.80 9.70 3.70 30 539 393 4.583 381 145 B 5120678-2 91313-1 408-4546 354687-2 408-9979 1320534-1 408-4573 13.70 10.00 14.80 820 13.00 539 4.393 46583. 32251 K 5120681-1 91313-1 408-4546 354687-2 408-9979 1320534-1 408-4573 13.70 10.00 14.80 9.70 14.50 539 .393 .583 .381 .570 P 5120681-2 91313-1 408-4546 354687-2 408-9979 1320534-1 408-4573 . E |< D - ee K. Pin >| >| >| >| + pl >| >>| >] Jo | Le], ee] a 1 pl >| >[ >| >| o | 10.00 pl >[>[>[ rl] oc E D 394 Typ. Pl) S| Pl S| S a [394] Pp; 2.50 P 5.75 : Pin [.0gg]? [.226] 1.25 a es wo mM a tos 0678-1 Sh 120678-1 n 1.00 7, Co7eet 5 ow A Pin 3.50 [.039] . . .138]' | '/ fet D - 6.42 Css BB Pin 7.00 Typ [253] Action Pin Area |. |__| Contact Area L276] "" 5 1 \ ' 2.50 [.098] Finished Size Optional Power Contact PIN 535875-x Recommended PC Board Layout (Component Side Shown) For Non-Midplane Applications For Midplane Applications Reference Page 112 | + Ref. Line Seating Plane Connector Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. 106 Catalog 1773095 Revised 12-08 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. www.tycoelectronics.com to change. Dimensions are shown for reference purposes only. Specifications subject USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Vertical Pin Header Assemblies (Continued) 6 Row, Center Module P.C.B. Hole Dimensions Drilled Hole 0.7+0.025rmm Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than Tin-Lead, reference Applica- tion Specification 114-13020. Pin Header Assemblies 11.80 + 0.18 "| [464 = .007] Number of Dimensions Pin Part Application Tooling sae Signal Pin Ground Blade Positions Ref. Numbers i a B eG PE Seating ISSheet FooairKit ISSheet_ Repair Kit IS Sheet aago 2ee0 2qa0 820 (S70) VA 5120674-1 91313-2 408-4546 -354687-2 408-9979 1320884-1 408-4573 aren any 2aaO ht an B 5120674-2 913132 408-4546 354687-2 408-9979 13205341 408-4573 60 : : : : 2000 2250 2000 8:20 (1200 KK = 5120679-1 91313-2 408-4546 -354687-2 408-9979 1820534-1 408-4573 2ay Bae aay sey azo IP 5120679-2 91313-2 408-4546 -354687-2 408-9979 1320834-1 408-4573 12at 10.00 12-40 8.20 370 A 451207321 91813-1 408-4546 -354687-2 408-9979 1320534-1 408-4573 12 19-00 1219 970 370 (B 5120732-2 91313-1 408-4546 354687-2 408-9979 13205341 408-4573 30 : : : 1241 10-00 1240 8.20 13.00 1K 51207421 91313-1 408-4546 -354687-2 408-9979 1320534-1 408-4573 "488 "300 438 oot 14.90 P 5120742-2 91913-1 408-4546 354687-2 408-9979 1820534-1 408-4573 ~ E =| D 7 ~lalelealelelelclelecle ETO K Pin Ott oye pepe ye yet yetyse Co i a a a a a _ o;ytytytyet yet yt yet yt tye a )tytl~aetlyaet etic yetyctlyactliae 22.50 alaelalalalalalalelale + 5 __ ++ __p _~ * .8a6] YP. . ee | I p 2.50 + Pin [.098] yp o 1.25 Soon oun tama ie T] 7 Loagy TYP | L049] 5120674-1 Shown ~E+j+p 1.00 | . Nhe | Logg] "YP 3.50 oA Pin stetetetetetetats! f _trsai PEEPEEP PE Tf 3 SRR | veo He tate terete tate tete 7h a IB) Pin 2.00 5 7 L276] Action Pin Area <> |__|. Contact Area Recommended PC Board Layout (Component Side Shown) For Non-Midplane Applications For Midplane Applications Reference Page 112 Ret. Line Seating Plane Connector Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. to change. Dimensions are shown for reference purposes only. Specifications subject USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 JO}BUUOD ESH HOVd-ZTyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Vertical Pin Header Assemblies (Continued) 6 Row, Right Module (accepts ESD Guide Pin) 11.80 + 0.18 [.464 # .007] 17.00 [669] P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than [ aL | yl I I Tin-Lead, reference Applica- tion Specification 114-13020. Pin Header Assemblies Application Tooling Signal Pin Ground Blade Repair Kit IS Sheet Repair Kit IS Sheet 1 - 1 9.00 620 a0 A 5120677-1 91313-1 408-4546 354687-2 408-9979 1320534-1 408-4573 14.45 10.00 9.70 3.70 Numberof ___Dimensions_ Pin Part Positions =A B D E Ref. Numbers Seating IS Sheet 568 393 381 145 B 5120677-2 91313-1 408-4546 354687-2 408-9979 1320534-1 408-4573 30 - - - = 1 a5 1 9.00 620 13.00 K 5120680-1 91313-1 408-4546 354687-2 408-9979 1320534-1 408-4573 ae 19.00 one 1450 P 5120680-2 91313-1 408-4546 354687-2 408-9979 1320534-1 408-4573 _ _+|+_ p + es ES sol ol ol o)o | K Pin offal alaloal/a alla] a|o| ola | re20) olfal al aloo, | \ nat: 10.00 oT] | 0|/o0|/ 0/0 2.50 [.394] Typ. 2\|/o|/o|o]o|o E D Loge} Y=] 425 ee |P pin 2.50 [.098] Finished Size ~ [.049] Typ. a | Optional Power Contact , - 2.00 a fF woNM i PYN 535875-x .079)Fe# 5120677-2 Shown +E _ D 3.50 1.138] /?- \ SS A Pin | HED > 6.42 7.00 (376 1 ; [253] << 3 B pin Action Pin Area ~ He = Contact Area | Recommended PC Board Layout + Ref. Line (Component Side Shown) Seating Plane Connector For Non-Midplane Applications For Midplane Applications Reference Page 112 Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. 108 Catalog 1773095 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 12-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Vertical Pin Header Shrouds __ 11.80 20.18 6 Row, Left Module [.464 + .007] P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than Tin-Lead, reference Applica- tion Specification 114-13020. Pin Header Assemblies Application Tooling Number of ___Dimensions_ Part sae Ground Blade Positions A B Cc Number Inserti IS Sheet OO nsertion ee Repair Kit 1S Sheet 30 13.70 10.00 1480 croogg4-1 9113-1 408-4546 1320534-1 408-4573 537 393 582 Non-Coplanar Daughtercards Coplanar Daughtercards (Pin 1a Header = Pin 1f Shroud Side) (Pin 1a Header = Pin 5a Shroud Side) Recommended PC Board Layout Reference Page 112 Recommended PC Board Layout Reference Page 112 (Shroud Side Shown) (Shroud Side Shown) Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. 109 Catalog 1773095 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 12-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 JO}BUUOD ESH HOVd-Zz Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Vertical Pin Header Shrouds (Continued) 6 Row, Center Module P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than Tin-Lead, reference Applica- tion Specification 114-13020. Pin Header Assemblies 11.80 0.18 l [.464 + .007] 17.00 [.669] Application Tooling Number of Dimensions Part ib Dimensions _ BI Positions A B c Number Insertion IS Sheet ae erect 60 26-90 22-50 2490 5120682-1 -91313-2 408-4546 1320534-1 408-4573 30 1257 10.00 1240 5120743-1 91313-1 408-4546 13205341 408-4573 22.50 22.50 Typ. Typ. } (920) FP so (9861 50 4 (esl 1.25 | [098] Ty _ 1.25 1 vos 1 00 - | | yous 1.00 [03a] "P- 1.039] "YP: 1 10 | 3. 50 -. 4 ite 3. 50 tet ytaytetetytytetetg : (138) ' (.138)" & + + e Ps s i ry Peete ass Py SEPEE ET ETT | ; s2etetetet ether ge gs SESE EET E Li tretetetetetetetotete 700 or gtetetatety 70 ys 2.00 ., [. 276) ' 2.00 [. 276) org] p79] Non-Coplanar Daughtercards (Pin 1a Header = Pin 1f Shroud Side) Recommended PC Board Layout Reference Page 112 (Shroud Side Shown) Coplanar Daughtercards (Pin 1a Header = Pin 5a Shroud Side) Recommended PC Board Layout Reference Page 112 (Shroud Side Shown) Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. 110 Catalog 1773095 Revised 12-08 www.tycoelectronics.com are U.S. equivalents. Dimensions are in millimeters and inches unless otherwise specified. Values in brackets to change. Dimensions are shown for reference purposes only. Specifications subject USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Vertical Pin Header Shrouds (Continued) 6 Row, Right Module P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than Tin-Lead, reference Applica- tion Specification Z-PACK HS3 Connector (Continued) 11.80 + 0.18 c [.464 # .007] | 17.00 [.669] 114-13020. | _ _ Pin Header Assemblies . . Application Toolin Number of Dimensions _ Part Pp a Blade Positions A B Cc Number Insertion 1S Sheet ee Repair Kit IS Sheet 10.00 14.20 30 _ 393 559 5120683-1 91313-1 408-4546 1320534-1 408-4573 10.00 .a94) TYP 2.507 | [aga] YP! . 1.25 [.049] 'YP- 1.00 3.50 [.039)'Y- [.138] YP: \ ee i]t fas $ d oat 2.00 5 ed [O73] ~~ 7.00 ae [.276] | P- 5 1 Non-Coplanar Daughtercards Coplanar Daughtercards (Pin 1a Header = Pin 1f Shroud Side) (Pin 1a Header = Pin 5a Shroud Side) Recommended PC Board Layout Reference Page 112 Recommended PC Board Layout Reference Page 112 (Shroud Side Shown) (Shroud Side Shown) Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. Catalog 1773095 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 12-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 Japan: 81-44-844-8013 UK: 44-8706-080-208 111 JO}BUUOD ESH HOVd-Zz Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Layout Guide for Midplane Applications 6 Row Connectors Non-Coplanar Applications Coplanar Applications Right Module soe To + 19 -& 6p Og eee & Gp: -O- - +e - oe ee mh Oo $ o + Vertical Pin Header, . * Shroud Feed-Through Bart No. 5120680 120683-1 Center Module 5 Bee - =e a see pete eee . % ry $ of % $ 7 +t are ese pee oe % e $ 3 % erty OO PH ~ Hee oere oe >} Vertical Pin Header, . * Shroud Feed euge Part No. 5120679 120682-1 Left Module ao 2ooTD oO + wo 4 $00 $ 4? PO Se oe ) 4 4,9 $ 4? ooo ses = wy Vertical Pin Header, Shroud Feed-Through Part No. Part No. 5120681 5120684-1 Right Module oo0 Toa + 0 aa greets oe % 4 +4 $ 3 & Oh Oe ee ee oO} oe ~ 4o eee o oe 4 Vertical Pin Header. . * Shroud Feed cus" Part No. 5120680 5120684-1 Center Module mp2 0,0 oy = tet tts Oh o> oe 4 +4 $ af + 4 - a3 7 Ob bh = ee | = arua rua seg == oO o> t = + @ = +4 $ s + Ms tot tte Oo ~ eee oe 4% Vertical Pin Header, . * Shroud ree nen Part No. 5120679 5120682-1 Left Module a ooTed = 10 reatg et oe} % ; > 3 & ott tet oop pele ~ 0-646 ee 4 Vertical Pin Header, Feed-Through shroud Part No. . 5120681 5120683-1 Note: All part numbers are RoHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. 112 Catalog 1773095 Revised 12-08 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets www.tycoelectronics.com are U.S. equivalents. to change. Dimensions are shown for reference purposes only. Specifications subject USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Right Angle Receptacle 10 Row, Left Module (accepts Universal Guide Pin) 7.75 : 2.50 28.67 OO 5.75 09a [YP [1.129] = 1.00 @ 5.40 _ [.226] 2.00 Z 039] 07g) YP | yp. 11.10 21.10 .a31] FoF | [437] 19.00 1.50 | 748 20.18 0.00) [.059] (748) 21.10 + 008 Typ. [.831] [-794 ~ goo 10.00 1376) yP. [.394] | { ? 1 y JO}BUUOD ESH HOVd-Z 2.00 4.05 11.70 1.2! Typ. +| 1.159) YP ~~ [461 04g] YP [078] [059] ve 10.80 [188] 1461] 14.04 [-049] Distance From 1.00 [.425] [.553] . Row a to 1.039] Typ. | Typ. oe Board Surface 2.00 [.079) YP: TT 23.83 ti tr bib tite (998) 4.80 Tred ale [189] ay aly aa dd mone ' 1: lel g apanaiaiai hb aeava ta day j 2.72 _| | aad & 107) TTACTACT ALLA | 123465-= \ Location Ref. Receptacle Assemblies Number of Part Application Tooling Positions Number |nsertion ISSheet HsgRemoval ISSheet ChicletRemoval |S Sheet 50 5120875-1 1338743-1 408-8394 1338744-1 408-8393 1338746-1 408-8410 . 1. 10.00 9 [.394) TYP: . . 50 T P.C.B. Hole Dimensions rose) Ps 350 Drilled Hole 0.7:0.025mm 238) - 7) 04g) TY age) TP- Fin. Hole 0.55 to 0.65mm t039)7P Cu-thickness 0,025 to 0.050mm O08 $66 bok ft SnPb-thickness 0.004 to 0.010mm Optional tether | j Mounting Hole t Th e a sh eset es _ | Htetetgty .00 Note: For finishes other than 10.00 t ? t t ee [551] Tin-Lead, reference [.394] prerorere? 4 Application Specification t + tb 114-13020. | +e ete tate, / 2.00 1 5 f Log] Ret Recommended PC Board Layout (Component Side Shown) Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. 113 Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Right Angle Receptacle (Continued) 10 Row, Left Module (accepts ESD Guide Pin) P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than Tin-Lead, reference Application Specification 114-13020. 114 Z-PACK HS3 Connector (Continued) n Js 14.04 | [.553] 22.86 [900] _ 28.67 100 5.75 ogay YP. [1.129] mj 100 Th. [.226] 2.00 | [,039] 2.00 yp. on Ny f 4 11.55 21.55 = aay Pet 19.00 [455] 5.42 of } [.748] | [213] f 1.50 20.18 +820 a110 } Typ [.794 * Spal 831] 10.00 5 [394] + | et. | Ls Ou A q ~~ I 4 2.50_/| |. 9.83 |) 2.00 150, || =| 4.95 yp {.098) [387] 1.25 [078] [059] "" * 11,70, [049] Distance From 1.00 [.461] Typ. Row a to 039) YP ~ Board Surface [.039] | |_ 10.80 5, ; 2.00 [425] L079 YP 20.60 [811] rH 23.85 Wiya [.939] ' b 1 d le e f didg i h What i ' k IT 12345- \ Location Ref. Receptacle Assemblies Number of Part Application Tooling Positions Number jnsertion ISSheet Hsg Removal ISSheet Chiclet Removal |S Sheet 50 5120793-1 1338743-1 408-8394 1338744-1 408-8393 1338746-1 408-8410 10.00 Typ. 250.7. on [.394] 5.75 [-098) C 1.25 [.226] | @ 2.50 [.098] Finished Hole Size For Optional Power ot ere? Contact ; P/N 535875-X t t t Tih O reir f tore e 10.00 t t t t d 7.00 5, [394] rete g 1.50 [276] 'P- geritte (is i ay 1 5 2.00 .079] Ref. Recommended PC Board Layout (Component Side Shown) Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Specifications subject to change. Dimensions are shown for reference purposes only. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America 2 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Right Angle Receptacle (Continued) 10 Row, Center Module 20.18 * 5:28 1.50 Typ, L794 * 008) 1 U Y W 2.00 1.50 | _f 4.05 Fp, | [1.82 [.078] [059] we [188] 072] Distance From 1.00 Row a to [.039) 'Y a | 10.80, Board Surface 2.00 [.425) YP. |_ L079) YP Lon = recep A 1 ry a IDA ap abp api aphy apa b t t i q q i q c eee d i q u Vy rig iq e yyy t 1 td a td td iy g uhh dana i h UEP eee J V7 Uy Oy a a k TLACLALTA LAL 1234567 _ Location Ref. Receptacle Assemblies Number of Dimensions Part Application Tooling Positions A B c Number _|nsertion IS Sheet _Hsg Removal ISSheet _Chiclet Removal IS Sheet 24.94 22.50 25.48 100 982 rs 103 -9120790-1 1338743-2 408-8394 1338744-1 408-8393 1338746-1 408-8410 12.44 10.00 12.90 50 490 394. 508 5120791-1 1338743-1 408-8394 1338744-1 408-8393 1338746-1 408-8410 . . 22.50 P.C.B. Hole Dimensions .8a6] [YP ow. 4 . 5 Drilled Hole 0.7+0.025mm .9g) YP: 7] 4.25 Fin. Hole 0.55 to 0.65mm 1.00 (.049) 'YP- Cu-thickness 0.025 to 0.050mm . eo 1 SnPb-thickness 0.004 to 0.010mm 5 wPesetecepegeegeges 6 Va, setetets oh ee Pearse se se se seat se ae Note: For finishes other than 14.00 yp. P18] Tetetetet tet tet tee Tin-Lead, reference (551) ge eg eg Pg re Myo q Application Specification | t t t t t t t + t trs 114-13020. * Ht ytatyt, \ 0.60 + 0.05 \ [.024 + 002] 1 10 ocation Ret. Plated Through Holes Typ. Recommended PC Board Layout (Component Side Shown) Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Catalog 1773095 Revised 12-08 reference purposes only. Specifications subject www.tycoelectronics.com to change. Dimensions are shown for USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 JO}BUUOD ESH HOVd-Z116 Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Right Angle Receptacle (Continued) 10 Row, Right Module (accepts Universal Guide Pin) P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than Tin-Lead, reference Application Specification 114-13020. @ 5.40 10.00 2.) 5.75 [.213] [.226] 2.50 5 2.00 Typ. , yp. L079) [098] 21.10 1 14.10 Laat] Ret j [437] 1.50 t 20.18 * 0:20 L089) + + 008. : [794 ~ 900] [.276] 10.00 | } [.394] oe + 4 2.00 . . | 9.85 [.078] | [.388] Distance From = toaal Typ. Rew a to 1.81 Board Surlace [.071] I 1 I 1 alapntititm 23.83 b fap eh aby) abi al [.938] Ceoupeyuguye yaa [.189] eH ee ah types neu Obidediupedy | p upeneag a Hee K fhe lant an eae am |_272 Location Ref. ZL -123465 [107] Receptacle Assemblies Number of Part Application Tooling Positions Number insertion ISSheet HsgRemoval ISSheet ChicletRemoval |S Sheet 50 5120874-1 1338743-1 408-8394 1338744-1 408-8393 1338746-1 408-8410 _ 10.00 Typ. [.394] 7 2.50 @ 2.75 Optional [.108] Mounting Hole 10.00 [.394] 0.60 + 0.05 [.024 + 002] 5.75 + Location Ref. Plated Through Holes [ 226] Typ. , Recommended PC Board Layout (Component Side Shown) Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Right Angle Receptacle (Continued) 10 Row, Right Module (accepts ESD Guide Pin) _-| L517] 94.57 [.849] 10.00 5.75 [226] Y- 2.50 Typ. O79) Typ. Loge) t 4 11.55 21.55 : [,848] Ret. 7 Or S153 1.50 . 0.20 Typ. 20.18 0.9 [.05g] 2 t +. [794 * boa] 10.00 | [.394] P/N 535875-X 2.00 @ 2.50 [.078] [098] Distance From Row a to 1.8 Board Surface [.071] Co 20.60 afi L811] 23.85 bit [.939] cha dji equ tie git hfe jqa kh Location Ref. Zo = 1 Receptacle Assemblies Number of Part Application Tooling Positions Number insertion ISSheet HsgRemoval ISSheet Chiclet Removal |S Sheet 50 5120792-1 1338743-1 408-8394 1338744-1 408-8393 1338746-1 408-8410 15.75 P.C.B. Hole Dimensions 10.00 [620] Drilled Hole 0.7+0.025mm [.394) TYP - 3.50 50 Tp ee Fin. Hole 0.55 to 0.65mm .138]/ [.098] 1.25 Cu-thickness 0.025 to 0.050mm rl ~ 1049)" gy 2.50 /.098] Finished thi | Hole Size For SnPb-thickness 0.004 to 0.010mm 6.4.6 4 Optional Power Se oy . Contact Note: For finishes other than Tin-Lead, reference Application Specification $ $ 4 aa ett Hibee eee, thee ee e + e e aro 20 -fo F x + + = . e 1144-13020, | * [.394] 4 4? $1 > 1 o79) Ret JO}BUUOD ESH HOVd-Z Recommended PC Board Layout (Component Side Shown) Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. 117 Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Vertical Pin Header Assemblies 10 Row, Left Module (accepts Universal Guide Pin) 24.00 [.944] P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than Tin-Lead, reference Application Specification TULL 11,80 +0.18 _ wie a 3.70 | 464 + .007] | [.146] 114-13020. |__.4 Application Tooli Number of Dimensions Pin Part eee ante ng G J Blad Positions A B c D Ref. Numbers Seating IS Sheet . gna in roun ade Repair Kit IS Sheet Repair Kit IS Sheet 13.70 19.00 218! 870 A 5120672-1 91312-1 408-4546 354687-2 408-9979 1320534-2 408-4573 50 - - - - 370 19.00 ae on B 5120672-2 91312-1 408-4546 354687-2 408-9979 1320534-2 408-4573 x Cpr] +l el] >[ > A Pin >| >| ele > a l>l[r]>l[>l[> appl] >| >| >| > + (U>[ >] >[>[> i3oq) DP of >| >| >| >| > 2.50 5 5.75 oe PLS >|> l 7 | B Pin yp. +> ++}. ofp] pl rl rl > . 098] 226] <> a > [098] 125 | ] a Uststslel> Action Pin Area Contact Area | 149) TYP: el >| >| >| > | 1.00 5, [,049] m4 Ref. Line [039] | | Seating Plane Connector +k COC OCIS oh eyo t t t oh 1.00 ab aeben 6 [039] 5120672-1 Shown 3.50 eof 14.00 [.138) YP: ote te. 4.00 [.157] [551] YP. t t t t od Finished Hole For , pe ee Optional Guide Pin | t t t t a P/N 223969-X at ytyty tes oogtiey 8 to [023 ] Location Ref. Plated Through Holes Typ. Recommended PC Board Layout (Component Side Shown) For Non-Midplane Applications For Midplane Applications Reference Page 126 Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. 118 Dimensions are shown for USA: 1-800-52 reference purposes only. Specifications subject to change. Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Canada: 1-905- Mexico: 01-800-733-8926 C. America: 52- 2-6752 470-4425 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 59-1106-0803 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Vertical Pin Header Assemblies (Continued) 10 Row, Left Module (accepts ESD Guide Pin) P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm = E 11.80 + 0.18 < =| [.464 + 007] ~e 24.00 [945] # 5120666-1 Shown @ 2.40 Finished Hole For i Part Number Part Number Fin. Hole 0.55 to 0.65mm 5120666-1 5120662-1 Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than Tin-Lead, reference T Application Specification | 114-13020. |__,_- Number of Dimensions Pi Part Application Tooling um ro In ar 7 7 Positions A B c D E Ref. Numbers Seating IS Sheet Signal Pin Ground Blade Repair Kit IS Sheet Repair Kit IS Sheet 1480 1900 2a 820 ae A 5120662-1 -91312-1 408-4546 = 354687-2 408-9979 1320534-2 408-4573 rae nop eer, yee eae IB) 5120862-2 91312-1 408-4546 -854687-2 408-9979 1820534-2 408-4573 50 . . . vee oop 27) 820 13.00 NK) = 51206866-1 91312-1 408-4546 -354687-2 408-9979 1320534-2 408-4573 14.80 10-00 22-7) 9.70 1350 yp) 5120866-2 91312-1 408-4546 -354687-2 408-9979 1320534-2 408-4573 |< = _ |= ___ pj _+ A) ALA] AL A] 10.00 A| Al A] Al A] 7 K Pin 1.394] TYP: z| al Al a] ALS 2.50 J, 5.75 Rl RR] RA] A] ' [.098) '? [.226] alxlalalal- | _+ 1.25 J, R| AL AL AL Alo ! 1.00 . [.04g] 'P- A| RA] AL Alo = E T D- [039] es | Al A] A] RA] Oo t\ ee aly | x[ Ra] al] Alo ' P Pin | Vest: AL ALA] ALA] | h rep Te g 13.42 3.50 Typ. f _. A P 14.00 [.138] [.528] a fk oO NM In [551] YP d c b a 1< \ ~\ Location Ref. Recommended PC Board Layout (Component Side Shown) For Non-Midplane Applications For Midplane Applications Reference Page 126 P/N 532828-X [.094] Optional Guide Pin Se: *B Pin Action Pin Area | |__| Contact Area I | - Ref. Line Seating Plane Connector Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. 119 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 JO}BUUOD ESH HOVd-Zz Tyco Electronics High Speed Backplane Connectors Vertical Pin Header Assemblies (Continued) 10 Row, Center Module P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm Fin. Hole 0.55 to 0.65mm Z-PACK HS3 Connector (Continued) 24.00 [.945] Typ. | 11.80 + 0.18 464 + .007] a|<_- E . Part Number Part Number Cu-thickness 0.025 to 0.050mm 5120658-1 5120664-1 SnPb-thickness 0.004 to 0.010mm Note: For finishes other than Tin-Lead, reference Application Specification 1174-13020, Number of Dimensions p p Application Tooling umber o1 in art : Positions A B c D E Ref. Numbers Seating 1S Sheet Signal Pin Ground Blade Repair Kit IS Sheet Repair Kit IS Sheet 2aan 2250 20e) 820 370) A 5120658-1 913122 408-4546 -354687-2 408-9979 1320534-2 408-4573 aan 280 2aeD Ore 312 NB) 5120858-2 91312-2 408-4546 -354687-2 408-9979 1320534-2 408-4573 100 - : 2690 22.50 2090 8:20 13.00 KK) 5120664-1 91312-2 408-4546 354687-2 408-9979 1320534-2 408-4573 7380. "385. 7380. oat v0 P 5120664-2 91312-2 408-4546 354687-2 408-9979 1920534-2 408-4573 eos age yop gy = WA)Ssi8120747-1 91312-1 408-4546 354687-2 408-9979 13205342 408-4573 ae 10.00 12g re 6370) Bl 5120747-2 91812-1 408-4546 -354687-2 408-9979 1320534-2 408-4573 50 : : ee soe lage Sao ee? KK) -5120748-1 91312-1 408-4546 -354687-2 408-9979 1320534-2 408-4573 Ve oe ee ee EP) 5120748-2 91312-1 408-4546 -354687-2 408-9979 1320534-2 408-4573 .___ E p> elo lololole lolo lo lo lo a K Pin [09a] "Y: 4.25 g{ojoljafofejolalofoaja | 4.00 | [04g] TYP flajojajofalofolofofa I (099) YP | | | ej/ojojajafajfafoafojojao * E T D ~ djaQjojajo}j;/ajojajojojo . ~ EE . tetatet erat yt etet et gk ce {ofa lafafa fo fo fa fo fo : P Pin PePPererey) | SHS SHHSE steeegtarstet tests 2 fajelaletelaa laa la ea + & orf atetatetatetatetetete = A Pin I feet] TP: oto yeaa tutecate! 09 87654321 | | SIT PTT TTT te ! Pet etgtyr gre tete rete? 5120664-2 Shown Serer eter ETE er EF a 10 1+ _\ on ~\ Location Ref Recommended PC Board Layout (Component Side Shown) For Non-Midplane Applications For Midplane Applications Reference Page 126 120 Action Pin Area {._.| i = B Pin |. __. Contact Area I Ref. Line Seating Plane Connector Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. reference purposes only. Specifications subject to change. Dimensions are shown for USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 C. America: 52-55-1106-0803 U K: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Vertical Pin Header Assemblies (Continued) - Cc =| 11.80 + 0.18 3.70 . A [.464+.007) 7)" "T.146] 10 Row, Right Module (accepts Universal Guide Pin) 24.00 [.944] P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than Tin-Lead, reference Application Specification 114-13020, f! i I |. p -| Number of Dimensions Pin Part Application Tooling nes . Signal Pin Ground Blade Positions A B D Ref. Numbers 1S Shi c Seating ISSheet PooairKit ISSheet. Repair Kit. IS Sheet Vea 10.00 22-28 820 WA _si88120670-1 913121 408-4546 354687-2 408-9979 1320534-2 408-4573 50 - - : : ee. 303. al at Bl -5120870-2 -91312-1 408-4546 354687-2 408-9979 1320534-2 408-4573 . 15.75 = [.620] 3.70 10.00 Typ. x |o|/ol/o|o;/o (146) | [394] (" |ololol alo A Pin 2.50 cee] jm 1-25 > [o[o|/ololo ' 1.00 [098] 9 | [oa] "VP oe |e alolale ne) | J 039) TP -|o|o/o|a/qo ko $6 oo o|o|o/o}o/o | t j Sater etye a [e|[elololo 3.70 i h > o|}0/o/o]}o/o [146] Op -O -h | -O ose o> B Pin 4.00 ott ttt cs/lololol|alo | | | | [.157] f eee or 6 |o|o/o|o/o Action Pin Area += = Contact Area Finished Hole e _ 14, ' For Optional 633335, got) TYP. | Ret. Line Din osaea-x ct t + t t a & Ow a Seating Plane Connector ao pret etg 5120670-2 Shown Location Ref. Recommended PC Board Layout (Component Side Shown) For Non-Midplane Applications For Midplane Applications Reference Page 126 Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. Dimensions are shown for USA: 1-800-522-6752 reference purposes only. Specifications subject to change. Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 JO}BUUOD ESH HOVd-Zz Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Vertical Pin Header Assemblies (Continued) 10 Row, Right Module (accepts ESD Guide Pin) P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm 11.80 + 0.18 < ~ | [464 = 007] Part Number Part Number Fin. Hole 0.55 to 0.65mm 5120661-1 5120665-1 Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than TT Tin-Lead, reference Application Specification | | 114-13020. B Number of Dimensions p p Application Tooling umber o1 in art : pee se Signal Pin Ground Blade Positions Ref. Numbers i AB G PE Seating ISSheet Pepair Kit ISSheet_ Repair Kit _ IS Sheet 14.46 10.00 22.28 8.20 3.70 569 .393 877 322 145 A 5120661-1 91312-1 408-4546 354687-2 408-9979 1320534-2 408-4573 14.46 10.00 22.28 9.70 3.70 50 569 393 877 381 145 B 5120661-2 91312-1 408-4546 354687-2 408-9979 1320534-2 408-4573 14.46 10.00 22.28 8.20 13.00 569 .393 877 322 51t K 5120665-1 91312-1 408-4546 354687-2 408-9979 1320534-2 408-4573 14.46 10.00 22.28 9.70 14.50 569 .393 877 381 570 P 5120665-2 91312-1 408-4546 354687-2 408-9979 1320534-2 408-4573 |} E _+|=_ D _+ 15.75 ~* a >| | S| Bl] rr [,620] 10.00 5, [elelelel> K Fin 250, 2, [4] 4.00 > [>[>[>[>[>] 098) YP] 1.25 _ 1,039) TYP: a [>|>l>l[el> Tl = Loagy TYP + |>[elele[= | r] | 882.n o |>|>|>l[ rly ! + & + +k [.138] a |r| P| S| S| Bb E | D pababasabad! pr oO |e] S| S| ele rer 2 pin 13.42 opt gtat 5 . eee | [528] t t + t t 9 14.00 Fi _p Pees oe otetetetet mnwno SS A Pin a tte 3 | eter eters? ! 5120661-1 Shown | or ore gree g | \ 5 1 | (079) Ref. @ 2.40 [094] Plated rept eo , Finished Hole For Optional . Guide Pin P/N 532828-X B Pin Recommended PC Board Layout (Component Side Shown) For Non-Midplane Applications For Midplane Applications Reference Page 126 122 | i. I | + Ref. Line Action Pin Area |. | Contact Area Seating Plane Connector Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Vertical Pin Header Shrouds 10 Row, Left Module OF}O o}fo o}f;o ojo ofjo OF}O o;fFo offo ojo offo Ofjo o}fo o}}o ojja ojja OjjoO offo offo offo ojta Of]/O offo ofjo ofjo ofjo P.C.B. Hole Dimensions Drilled Hole 0.7+0.025mm A Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm __11.8040.18 | [.464 + .007] | = =e || =) |_| 24,00 T_ [944] 1 | I I T Note: For finishes other than - B > Tin-Lead, reference Application Specification 114-13020. Receptacle Assemblies : : Application Tooling Number of Dimensions Part Ground Blade Positions Number i _ eres A B Cc Seating IS Sheet Repair Kit 1S Sheet 50 137) 10.00 22-80 8120668-1 -91312-1 408-4546 1320534-2 408-4573 10.00 10.00 .a94] TYP. iagay TYP: 2.50 2.50 I 098) YP (ose) 9 Jon 1.25 i 1.25 0 | [029 YP | (.0ag] TYP: [.038] oN 7 TY [.039) 'YP- rT] > oo, 6, k oe oo k Het et ete j Hater get | 33.5358 ttt} ete 9 3.50 5 t Tt t tc3 3.50 5, 9 14,00 [138] $ o? oo e 44.00 [.138] e i551] |YP: t o t tos [551] YP d Hee ery | ! feteeete : pO a, a 0.60 + .002 0.60 + .002 nN [.023 40.05] 5 I~, cation Ret. [.023 * 0.05 ] 5 1~_\__ Location Ret. Plated Through Holes Plated Through Holes Typ. Typ. Non-Coplanar Daughtercards (Pin 1a Header = Pin 1k Shroud Side) Recommended PC Board Layout Reference Page 126 (Shroud Side Shown) Coplanar Daughtercards (Pin 1a Header = Pin 5a Shroud Side) Recommended PC Board Layout Reference Page 126 (Shroud Side Shown) Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. JO}BUUOD ESH HOVd-Z 123 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Catalog 1773095 Revised 12-08 USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 Dimensions are shown for reference purposes only. Specifications subject to change. Dimensions are in millimeters and inches unless otherwise specified. Values in brackets www.tycoelectronics.com are U.S. equivalents.Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Vertical Pin Header Shrouds (Continued) 11.80 40.18 | [-464 + .007] | 10 Row, Center Module _ Sst se oa o a oa a 6 a oa a co | oa o o a a o o o o oa ) aofcofofofofopofofotc 24.00 obehoToRoToLofo[o|- [.944] Pe oa o oa o oa 5 a a a a l 35 oa oO o oa a 5 a a a a i P.C.B. Hole Dimensions _ Drilled Hole 0.7+0.025mm A Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than Tin-Lead, reference Application Specification lat B _ 114-13020. Receptacle Assemblies : : Application Tooling Number of Dimensions Part Ground Blade Positions Number i _ eres A B Cc Seating IS Sheet Repair Kit 1S Sheet 24.90 22.50 24.90 100 "980 886 980 5120663-1 91312-2 408-4546 1320534-2 408-4573 50 12.417 10.00 12.40 5420750-1 -91312-1 408-4546 1320534-2 408-4573 488 394 488 Typ. + 50 aa] 1.25 1.25 [.049] 04g] 'YP: & @k k ict t saeaa te $ tte: ts d cd Fete ee besa: ts * root a | ea 0.60 + 0.05 10 1 \ 0.60 + 0.05 [.024 + .002] - Location Ref. [.024 + 002) 10 1 =\_ Location Ret. Plated Through Holes Plated Through Holes Typ. Typ. Non-Coplanar Daughtercards Coplanar Daughtercards (Pin 1a Header = Pin 1k Shroud Side) (Pin 1a Header = Pin 10a Shroud Side) Recommended PC Board Layout Reference Page 126 Recommended PC Board Layout Reference Page 126 (Shroud Side Shown) (Shroud Side Shown) Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. 124 Catalog 1773095 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 12-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Vertical Pin Header Shrouds (Continued) 10 Row, Right Module 11.80 1 0.18 _ [464 .007] | a ofefofc|o 24.00 opafofafo [945] EEE : P.C.B. Hole Dimensions _ a > Drilled Hole 0.7+0.025mm <r Fin. Hole 0.55 to 0.65mm Cu-thickness 0.025 to 0.050mm SnPb-thickness 0.004 to 0.010mm Note: For finishes other than Tin-Lead, reference | Application Specification | | 114-13020. <_ B Receptacle Assemblies Application Tooli Number of Dimensions Part Goound Blade Positions Number i A B Cc Seating IS Sheet Repair Kit 1S Sheet 50 Ag 10.00 22.28 5120667-1 91312-1 408-4546 1320534-2 408-4573 . 10.00 10.00 2.50 [.394] TYP: [.098) 1.25 4, [.049] . [.049] Typ. | \ t See | = 5 oh 1.00 tetgtytet g 1 om 3? (ove) 2 350 Typ, t t t t srt 14.00 3o4 [.138] + ca - ah, soi) YP [.138] + e ren Typ. &d ~ os eoere + . 3, ace 2 oe b fo Sa boa 0.60 + 0.05 5 1=_ . 0.60 + 0.05 < \ (023 +1.27] Location Ref. [.023 1.27] 5 1 Location Ref. Plated Through Holes Plated Through Holes Typ. Typ. Non-Coplanar Daughtercards (Pin 1a Header = Pin 1k Shroud Side) Recommended PC Board Layout Reference Page 126 (Shroud Side Shown) Coplanar Daughtercards (Pin 1a Header = Pin 5a Shroud Side) Recommended PC Board Layout Reference Page 126 (Shroud Side Shown) Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Catalog 1773095 Revised 12-08 Specifications subject www.tycoelectronics.com to change. Dimensions are shown for reference purposes only. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 South America: 55-11-2103-6000 JO}BUUOD ESH HOVd-Zz Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Layout Guide for Midplane Applications 10 Row Connectors Non-Coplanar Applications Coplanar Applications Right Module Q Right Module i it Pt tot OOOO PO OOo cseaeasasas +e +o+, +, yt eye hee - RyP ye Eh He ee Vertical Pin Header, spigua Vertical Pin Header, spioud Feed wough Part No. Feed wough Part No. 5120665 5120667-1 5120665 5120668-1 Center Module caoveseoe_ | Center Module cs nhoveeornux : ol ii ti til o tel el et He C Peete eee et 2 oe es eee ne | Potro Poe oF Oye eye te eo +9 aaa ress uae rere seg ere, gr gt og? My? areas aria riers aria ara re BP PS OE OH OO EH OO BH Laces aeees neasaseneias Vertical Pin Header. + +4 *? +4 * ye Vertical Pin Header, + * +4 +? + No.of "Feed-Through Smad = 4-4 6 + $4 8-6 + Dos, -Feed-Through ' partwo, 9 # POL e ee Part No. _ ttt te te eet Part No. +44 s+ oe eoe 100 5120664 5120663-1 _ ere 6 ets $4 ats 100 5120664 5120663-1 $6 ete $3 ave 6 50 5120750-1 op ep 50 5120750-1 op pw Left Module Left Module op se shseeds posse usBarwasuest 6 $s #5 Pag 4 $3 6e $ 6e $e o> oe oO ho OP oF, se ttt tee tee POS Of PO Ob o PO Oe OF FOO oe ee ep ee Ho O-> o-oo} 4 $o-> -$-> -O-> -$-o > o b+ oF 4% o bo 4 Vertical Pin Header, Feed-Through ome Part No. 5120666 5120667-1 Note: All part numbers are RoHS compliant. 126 Vertical Pin Header, Feed-Through Part No. 5120666 Q Shroud Part No. 5120668-1 Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 Tyco Electronics High Speed Backplane Connectors Coding Keys (10 Row Only) Compatibility 2-PACK HS3, Z-PACK 12 row connectors Part Number 120639-3 (white) Part Number 120639-6 (red) Material & Finish Valox Power and Guide Hardware Universal Power Module Vertical Receptacle (3 Pos.) The Tyco Electronics Universal Power Module is a multi-position, modular, hard metric board-to-board power connector designed to be compatible with Z-PACK 2mm HM connec- tors. The design is in an inverse-sex orientation and the vertical receptacle module meets the IEC 950 safety requirements for finger probe protection. Both the headers and recep- tacle utilize Tyco Electronics ACTION PIN press-fit leads for ease of assembly onto printed circuit boards. Additionally, the vertical receptacle leads are polar- ized to allow only one orien- tation onto the printed circuit board, eliminating the possi- bility of reverse placement. The Universal Power Module is compatible with a wide variety of other Tyco Electronics board-to- board connectors including Z-PACK HS3, Z-PACK HM-2d and Z-PACK TinMan connectors. The right angle header contacts are available with sequenced lengths for make-first/oreak-last applications. Generous alignment features designed into the housings and optional guide pins and receptacles make the Tyco Electronics Universal Power Module ideal for blind mating applications. Z-PACK HS3 Connector (Continued) = j {Po | I) 6.20 ih [244] Co 1 | 10.90 | [.429] Vertical / Receptacle / Outline Plated Through Hole Top Surface of |/ ~ (12 Pies) aa Ics. Daughtercard | Ref. 1.50 Ref, [.059] Recommended PC Board Hole Layout Part Number 120639-6 Part Number 120639-3 3.70 9.62 [.146] Mating Point 9.50 ~ [.374] Position Part Loaded Numbers Vertical ABC 5223955-2 Receptacle AC 5223984-1 High Current ABC 5-5223955-2 AMX, PCB Hole Dim. Drilled Hole = 0.7000 + 0.025 /.02756 + .0010) Finished Hole = 0.60 2 0.05 [.024 + .002] Cu Thickness = 0.375 + 0.0125 [0148 + .00049] SnPb Thickness = 0.007 + 0.003 [6003 + .0001] Note: For finishes other than Tin-Lead, reference Application Specification 114-1103. Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 CG. America: 52-55-1106-0803 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 South America: 55-11-2103-6000 J0}ISUUOD ESH MOVd-Z128 z Tyco Electronics High Speed Backplane Connectors Power and Guide Hardware (Continued) Expanded Universal Power Module Vertical Receptacles Material and Finish Housing Polyester, gray Contact Copper alloy, plated 0.00127 [.000050) min. gold in mating area, 0.00050 [.000020] min. Tin-Lead on ACTION PIN product area, with entire contact underplated 0.00127 [.000050] min. nickel Related Product Data Guiding Hardware (Optional) pages 132 and 133 Application Tooling Header Seating Tool, 224441-1 Board Support Fixture, 224442-1 Receptacle Seating Tool, 224421-1 Board Support Fixture, 217602-1 Technical Documents Product Specification 108-1651 Application Specification 114-1103 Tyco Electronics Instruction Sheet 408-4169 (Receptacle Seating Tool 224421-1) Note: For additional Power Module options reference Catalog 1773096, Power Connectors and Interconnection Systems, or contact your Tyco Electronics Sales Representative. Z-PACK HS3 Connector (Continued) 3.00 0.50 L118] [020] E553] i <= | t t oaea, ' + 2.00 2.00 [079] [.079] 12.15 20.05 9,95 + 0.05 11.35 0.08 0.20 AtPost [478 = 002) [.892 + .002] [.447 +003] [008] Tip Typ. 3.702028 1. 9.62 40.30 1.00 ,., [146 #.011] [.379 +012] [039] "" . \ _-~ Mating Point S EH i > S ppm pee) = A 0.75 w Ref Spaces L030)" | 1 I] + 0.05 At oO [+ -002] 3.00 1 [.118] | L_ a S D 2.50 [.092] Ref. 2.00 3.00 [.118] AY Plated Through Hole 48 Pics. _, _-Top Surface of Daughter Card Ret. 1.50 [.059] Ref. + Recommended PCB Hole Layout B Standard High Current Position A Rot 100 1A er. Part Number Part Number 4 3 ue 5223995-1 120953-1 5 4 1850 5223995-2 120953-2 6 5 1850 5223995-3 120953-3 7 6 au 5223995-4 120953-4 8 7 24.50 5223995-5 120953-5 *Reference Product Specification 108-1651. AY PCB Hole Dim. Drilled Hole = 0.7000 + 9.025 [.02756 = 0010] Finished Hole = 0.60 + 0.05 [.024 + 002] Cu Thickness = 0.375 + 9.0125 [.0148 + 00049] SnPb Thickness = 0.007 + 9.003 [.0003 + 0001] Note: For finishes other than Tin-Lead, reference Application Specification 114-1103. Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 Dimensions are shown for reference purposes only. Specifications subject to change. CG. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Power and Guide Hardware (Continued) Universal Power Module Right Angle Headers (3 Pos.) Material and Finish Housing polyester, natural color Contacts Copper alloy, plated 0.0012? [.000050) min. gold in mating area, 0.00050 [.000020) min. Tin-Lead on ACTION PIN post area, with entire contact underplated 0.00127 [.000050) min. nickel Note: For additional Power Module options reference Catalog 1773096, Power Connectors and Interconnection Systems, or contact your Tyco Electronics Sales Representative. Note: All part numbers are RoHS compliant. Tin-Lead parts are RoHS compliant through exemption for lead in press-fit connectors. Z-PACK HS3 Connector (Continued) 6.00 [.236) 'YP- f x L [089] oY 1 ib a Position A+! \ Ul Position C Position B LL 9.75 +0.05 [.384 +002] 3.50 1.50 [.138] [.059] | r 150 | [.059] let + | 3.00 | | [.118] At - $ +; iN @ 2.00 + 0.05 Thru Hole [.079 = 002) 2 Pies. 14,60 = 0.13 [.575 + .005] 12.00 + 0.08 L472 + .003] 9.70 + 0.08 [.382 + .003] | 2.00, 3.22 10.25 11.70 = 0.08 - Lora] %F* [127 + 010] 461 .003 a 4.00 [ ] L187] Ref. L. 15.70 . [.618] AN All Plated Through Hole 12 Ples. 3.00 Typ. 118] L aN PCB Hole Dim. Drilled Hole = 0.7000 + 0.025 [.02756 + .0010) Finished Hole = 0.60 + 0.05 [.024 + .002) Cu Thickness = 0.375 + 9.0125 [091.48 + .00049) SnPb Thickness = 0.007 + 0.003 [0003 + .0001) 2.98 Ref. [.117] 2 Ples. Note: For finishes other than Tin-Lead, reference Application Specification 114-1103. Recommended PC Board Hole Layout Blade Length Dimensions Standard 10A High Current 15A Position A Position B Position C Right Angle Header Right Angle Header Part Numbers Part Numbers 10.90 [.429] 10.90 [.429] 10.90 [.429] 5223961-1 5-5223961-1 10.90 [.429] 9.30 [.366] 10.90 [.429] 5223962-1 _ 10.90 [.429] 9.30 [.366] 9.30 [.366] 5223968-1 10.90 [.429] 7.68 [.302] 10.90 [.429] 5223972-1 _ 10.90 [.429] 7.68 [.302] 9.30 [.366] 522397 1-1 _ 10.90 [.429] 7.68 [.302] 7.68 [.302] 5223970-1 _ 9.30 [.429] 10.90 [.429] 9.30 [.366] 5223963-1 _ 9.30 [.366] 10.90 [.429] 7.68 [.302] 5223964-1 _ 9.30 [.366] 9.30 [.366] 9.30 [.366] 5223967-1 9.30 [.366] _ 9.30 [.366] 5223975-1 _ 9.30 [.366] 9.30 [.366] 7.68 [.302] 5223981-1 9.30 [.366] 7.68 [.302] 9.30 [.366] 223965-1 7.68 [.302] 9.30 [.366] 7.68 [.302] 5223983-1 7.68 [.302] 7.68 [.302] 9.30 [.366] 5223980-1 _ 7.68 [.302] 7.68 [.302] 7.68 [.302] 5223974-1 5-5223974-1 Reference Product Specification 108-1651. 129 Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for USA: 1 reference purposes only. Specifications subject to change. 800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 JO}BUUOD ESH HOVd-Zz Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Power and Guide Hardware (Continued) Expanded Universal Power Module Right Angle Headers Material and Finish Housing Polyester, gray Contacts Phosphor bronze, plated 0.0012? [.000050) min. gold in mating area, 0.00054 [.000021] min. Tin-Lead . a " on ACTION PIN product area, with entire Citgo | sage sons contact underplated 0.00127 [.000050] Typ. [575 + 005] min. nicke 12002008 1.20 Min (472 0% [.047] 4 Pies. 7) - beer Ref. Related Product Data Guiding Hardware (Optional) 9. al one pages 132 and 133 y [.382 =.003) 14.33 Application Tooling [Tt er Co Th im rT Header i VU) YY | Seating Tool, 224441-1 2, 0 | aa ae Fixture, 224442-1 | nzoxoce_| 1079] 0 a2 c02s eceptacie [.461 + .003) 4,00 [.127 +.010] Seating Tool, 224421-1 15.70 1.157 "ef Board Support Fixture, 217602-1 [-818] Technical Documents A Product Specification . All Plated 108-1651 [05a] + Through Hole ZA, PCB Hole Dim oe ce gs 16 Ples. Drilled Hole = 0.7000 + 0.025 [.02756 +.0010] Application Specification f Finished Hole = 0.60 + 0.05 [024 + .002] 114-1103 | 6.00 3.00 Cu Thickness = 0.375 + 0.0125 [.0148 #00049] Tyco Electronics Instruction Sheet ' at | F (11a 7? SnPb Thickness = 0.007 = 0.008 [.0003 + 0004] 408-4169 (Receptacle . . . . : L Note: For finishes other than Tin-Lead, Seating Tool 224421-1) reference Application Specification _ L 2.98 Ref 114-1103 [.117] 2 Ples. @ 2.00=0.05 Thru Hole [.079 + .002] 2 Ples. Recommended PC Board Hole Layout Positions ___Dimensions _ SerOA Noho A B Base Part Number Base Part Number 4 Bor we 5646954 120954 5 Be 6, 5646955 120955 8 3 a ae 5646956 120956 7 05 a 5646957 120957 Note: For additional Power Module 8 1083 ae 5646958 120958 options reference Catalog 1773096, Power Connectors and Interconnection Systems, or contact your Tyco Electronics Sales Representative. ' Dash number indicates sequence pattern. See customer drawing for specific dash numbers. Reference Product Specification 108-1651. Note: All part numbers are ROHS compliant. Tin-Lead parts are ROHS compliant through exemption for lead in press-fit connectors. 130 Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Power and Guide Hardware (Continued) AMP-HDI Static Discharge Guide/Power Pins Compatibility 7-PACK HS3, 2-PACK 2mm HM connectors Part Number 532828-5" Nut 21124-4 Washer 986794-1 Max. Current Rating 10 Amperes Additional sequence lengths are available, contact Tyco Electronics Material and Finish Brass, plated 0.00076 [.000030] gold over 0.00127-0.00254 [.000050- .000100] nickel AMP-HDI Guide Pin/Power Receptacles Compatibility 7-PACK HS3 connector Part Number 535875-1* Max. Current Rating 10 Amperes Additional lengths are available, see customer drawing. Material and Finish Contact Finish 0.00076 [.000030] gold in contact area, over 0.00127 {.000050] min. nickel underplate. Gold flash on remainder of the contact ESD-Guide Pin/Feed-through Compatibility 7-PACK HS3 connector Part Number 120759-2* Max. Current Rating 10 Amperes Additional sequence lengths are available, contact Tyco Electronics Material and Finish Brass, plated 0.00076 [.000030] gold all over 0.001427-0.00254 [.000050- 000100] nickel underplate Z-PACK HS3 Connector (Continued) Dia, 24.89 12.06 [.980] NS Ty Thi ot TS py [.475] HLVEvHAgE/Unaadari #2-56 UNC-2A 4 2.03 [.080] Dia Thread 2.36 5 Dia. 1.02:10.38 (088) [.040+.015] Bracket | | eS J. 6.10 [.240] 12.27 483] _ 3.05+0.08 [.120+.003] 4.17+40.08 [.164+.003] | 2,03:0.03 [.080+.001] . 26.03 an [1.03] , 11.00 24.26 pag 1.78 493) [.960) "" .070] 035 : : [001] Spherical Radius W ~ [098] Max. Note: All part numbers are ROHS compliant. UONNANLOMNY 2.50 | | \ M3 #2-56 UNC-2A Thread 134 Catalog 1773095 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 Revised 12-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 www.tycoelectronics.com are U.S. equivalents. to change. CG. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 JO}BUUOD ESH HOVd-Z132 Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Power and Guide Hardware (Continued) Guide Pin (Unkeyed) See Chart 7.80 Dia, Material and Finish [.307] Guide Pin Passivated stainless steel Part Number 223956-1 LOCTITE sealant Bo applied in this area. tel A Dimension Thread Part Numbers A B 7.50 [.295] 24.73 [.974] M4 x 7-6g 223982-1* 9.20 [.362] 25.16 [.991] M4 x 7-6g 223969-7 12.70 [.500] 25.16 [.991] 8-32 UNC-24 223969-4 12.70 [.500] 25.16 [.991] M4 x 7-6g 223969-1 6.20 [.244] 25.16 [.991] M4 x 7-6g 223956-1 12.70 [.500] 31.25 [1.230] 8-32 UNC-2A4 1-223969-0 3.80** [. 150] 27.16 [1.069] M4 x 7-6h 120646-1 2.00** [.079] 27.16 [1.069] M3 x 0.5 223988-1 *6.35 Hex Base Internal Thread Female Guide Module (Unkeyed) Material and Finish Guide Module Zinc alloy, chromate conversion coated Related Product Data Application Tooling | | Seating Tool, 224440-1 970 Ree Board Support Fixture, 217603-1 [.382] | aye -- 5 te qin 7 1 L ne I * 5.50 i I Technical Documents [217] Product Specification 108-1651 3.175 20.08 |, inatl HWinati [.125 + .003) Application Specification Enilled Hole _ _- - ke 2 Ples. Part Number 223957-1 PN 4-40 UNC-2B Part Numb 223979-1 36) art Number = - [1.346] (dual aligament posts) 15.00 ' [591] 5.75 [.226] ey rT f tik [> 11.00 LOCTITE is a trademark of Henkel Corp. zal [.443] Note: All part numbers are RoHS Recommended PC Board Hole Layout compliant. Catalog 1773095 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 12-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connectors Power and Guide Hardware (Continued) Guide Pin (Keyed) Material and Finish Guide Pin Zinc alloy, chromate con- version coated Part Number 223985 Dimension Part A B Number 25.16 20.39 991 803 223985-1 29.00 24.23 1.142 954 223985-3 Female Guide Module (Keyed) Material and Finish Guide Module Zinc alloy, chromate conversion coated Part Number 5223986 on Thread Number 0 4-40 5223986-1 45 4-40 5223986-2 90 4-40 5223986-3 135 4-40 5223986-4 180 4-40 5223986-5 225 4-40 5223986-6 270 4-40 5223986-7 315 4-40 5223986-8 o M2.6 5120913-1 45 M2.6 5120913-2 90 M2.6 5120913-3 135 M2.6 5120913-4 180 M2.6 5120913-5 225 M2.6 5120913-6 270 M2.6 5120913-7 315 M2.6 5120913-8 Z-PACK HS3 Connector (Continued) 6.35 @ 4.85 10.05 A | 3.85 .250 r E [191 .002] -. B [280] 28.70 O49 ri 52] 1.00 | 34a + 002) 24 Ref. [.039] TT] 4 ' f \ _ _ _ _ __ |) @ 4.82 20.05 5.92 + 0.08 } R050 A rT | (190, 002] [.233 + 003] , | [.020] 1.70 . \ 4.14 + 0.05 [067] 1.00 | [.163 + .002] [.039] 6-32 UNC-2B 6.00 Deep 01.10 + 0.05 <__ 45 Typ. [236] [.043 = 002) 1 oS 2 x x 0.50 34 t [.020] 3.85 + 0.05 \i eo 4.002) a kX [.152 +.002) 4 \, 6 \ Row E HM Connector \ 5.002 0.05 [.197 + 002] Recommended PC Board Layout (Position Shown Used with Part Number 5223986-1) 34.20 [1.346] 26.70 [1.051] 9.70 + 0.08 mA [.382 + 003] @ 5.40 + 0.08 [.213 +003] O7.40+0.08 _, [.291 + .003] 4.40 = 0.05 [.173 = .002] Footprint Note: All part numbers are ROHS compliant. 0.05 7.90 * O40 [ten + 002) I 3.02 +0.10 sgrsom Lat Ce [.133 +003] Threaded Hole See Table 3.175 + 0.08 [125 + .003] 2 Plies. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208 133 JO}BUUOD ESH HOVd-Zz Tyco Electronics High Speed Backplane Connectors Z-PACK HS3 Connector (Continued) Z-PACK HS-3 Connector Mating Sequence Chart 134 | oo ae Lp i Fully Mated Reliable Mate Dim. A Dim B. Product : Fully Mated Family Dim.c Fully Contact Reliable FirstMate Wipe Length Mated Mate Last Break 7-PACK HM-Zd 1.50 12.50 Ground Shield 16.78 [.661] 17.55 [.691] 4,28 [.169] Product 659 492 Signal Level 2 15.41 [.607] 15.85 [.624] 2.91 [.115] Signal Level 1 13.91 [.548] 14.35 [.565] 4.41 [.056] Z-PACKHM-Zd 4 99 1250 24.0 mm Pin 27.50 [1.083] 33.40 [1.315] N/A Guide 118 492 22.2 mm Pin 25.70 [1.012] 31.60 [1.244] N/A Hardware Key Blocking Point N/A 22.03 [.867] N/A Ground Pins 16.44 [.647] 17.13 [.674] 3.94 [.155] Z-PACKTinMan 1.50 12.50 - Product 69 492 Signal Level 2 14.94 [.588] 15.63 [.615] 2.44 [.096] Signal Level 1 N/A N/A N/A Signal Level 3 18.27 [.719] 18.84 [.742] 5.77 [.227] Z-PACK 2mm HM 1.50 12.50 - Product 059 492 Signal Level 2 16.77 [.660] 17.34 [.683] 4.27 [.168] Signal Level 1 15.27 [.601] 15.84 [.624] 2.77 [.109] Ground 18.00 [.709] 5.50 [.217] MULTIGIG RT = 9.59 12.50 Signal Level 3 18.00 [.709] 5.50 [.217] Product .098 492 Signal Level 2 16.50 [.650] 4.00 [.157] Signal Level 1 15.00 [.591] 2.50 [.098] Ground 18.00 [.709] 5.50 [.217] MULTIGIG RT 2.25 12.50 Signal Level 3 18.00 [.709] 5.50 [.217] Product -089 492 Signal Level 2 16.50 [.650] = 4.00 [.157] Signal Level 1 15.00 [.591] _ 2.50 [.098] MULTIGIG AT 5.50 12.50 Power Level 3 23.75 [.935] _ 11.25 [.443] Power O17 492 Power Level 2 22.25 [.876] _ 9.75 [.384] Module Power Level 1 20.75 [.817] _ 8.25 [.325] MULTIGIG RT N/A 12.50 Guide Pin Key 33.25 [1.309] N/A 20.75 [.817] uide c Hardware 492 Guide ESD Contact 30.75 [1.214] _ 18.25 [.719] >-PACK HS3 150 1250 Ground 17.08 [.672] 17.60 [.693] 4.78 [.188] - 5 5 ; Product 059 492 Signal Level 2 16.05 [.632] 16.47 [.648] 3.75 [.148] Signal Level 1 14.55 [.573] 14.97 [.589] 2.25 [.089] Power Level 3 20.25 [.797] 20.95 [.825] 8.10 [.319] UPM 339 Fee Power Level 2 18.65([.734] 19.35 [.762] 6.50 [.256] Power Level 1 17.03 [.670] 17.73 [.698] 4.88 [.192] UPM Guide Pin Key 31.39 [1.236] 36.16 [1.424] N/A | 5.75 12.50 Guide 3968 492 Keyed Guide Pin 31.39 [1.236] 36.16 [1.424] N/A Hardware Keyed Guide Pin 35.23 [1.367] 40.00 [1.575] N/A PreMate Power 5.61 [.221] Level 1 _ 16.84 [.663] Min. MULTI-BEAM XL PostMate Power 4.34 [171] ight Angle 5.08 14.73 Level 2 ~ 17.81 [.701] Min. Vertical -200 580 PreMate Signal _ 18.26 [.719] 3.81 [.150] Receptacle Level 2 on Min. PostMate Signal 2.54 [.100] Level 3 _ 19.53 [769] Min. PreMate Power _ 5.61 [.221] Level 1 15.32 [.603] Min, MULTI-BEAM XL PostMate Power 4.34 [.171] Foneptacle 3.81 13.21 Level 2 16.28 [.641] Min. to Vertical .150 520 PreMate Signal _ 16.74 [.659] 3.81 [150] Header eve In. PosiMate Signal _ 2.54 [.100] Level 3 18.01 [.709] Min. Catalog 1773095 Revised 12-08 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are U.S. equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208z Tyco Electronics High Speed Backplane Connector $ Z-PACK HS3 Connector (con tinued) Application Tooling and Equipment 1585280-1 Model AP3 Insertion Tool Assembly IS 408-9979 Setscrew IS 408-9979 N Pusher IS 408-9979 Chiclet Removal Tool IS 408-8410 Ground Blade Extraction Tool IS 408-4573 > 1585696-1 Model BMEP 5T Contact Replacement Tool IS 408-2636-1 Pin Support Tube IS 408-9979 cs \ Pin Repai 1585699-1 Model MEP 6T Replace Extraction Tool Assembly IS 408-9979 r Kit IS 408-9979 Ground Blade Repair Kit I$ 408-4573 Ground Blade Insertion Tool Typical Manual Arbor Frame Assembly (Commercially Available) ment Pin Assembly IS 408-9979 Tool Tip IS 408-9979 Housing Removal Tool Kit IS 408-8393 IS 408-4573 ee a ~ a me a ~ -) ms Le oN i ve a = LC N . A L ae a a ae al al ~ e711 ae a | a ip - Se Note: All part numbers are RoHS Typical PC Board Support Typical Receptacle Seating Tool Typical Pin Header Seating Tool compliant. (Customer Supplied) IS 408-8500 IS 408-8501 Catalog 1773095 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 12-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are U.S. equivalents. to change. CG. America: 52-55-1106-0803 UK: 44-8706-080-208 135 JO}BUUOD ESH HOVd-ZTyco Electronics High Speed Backplane Connectors Engineering Notes 136 Catalog 1773095 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 12-08 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are U.S. equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208