SR5200 VOLTAGE 200 V 5.0 Amp Schottky Barrier Rectifiers Elektronische Bauelemente RoHS Compliant Product A suffix of "-C" specifies halogen & lead-free DO-27 FEATURES Low forward voltage drop High current capability High reliability High surge current capability Epitaxial construction C A B MECHANICAL DATA Case: Molded plastic Epoxy: UL94V-1 rate flame retardant Lead: Lead solderable per MIL-STD-202 method 208 guaranteed Polarity: As Marked Mounting position: Any Weight: 1.10 grams (Approximately) D A Millimeter Min. Max. 25.4 (TYP) 7.20 9.50 4.80 5.60 1.10 1.30 REF. A B C D MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25C ambient temperature unless otherwise specified.Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Maximum Recurrent Peak Reverse Voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current See Fig. 1 Peak Forward Surge Current, 8.3 ms single half sine-wave Superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage IF = 5 Amps, TA = 25C IF = 5 Amps, TA = 125C Maximum DC Reverse Current at Rated DC Blocking TA = 25C Voltage (Note 3) TA = 125C Typical Junction Capacitance (Note 1) Typical Thermal Resistance RJL (Note 2) Operating Temperature Range TJ Storage Temperature Range TSTG Ratings Unit 200 200 200 V V V 5 A 120 A 0.92 0.76 0.05 8 200 10 -50 ~ +150 -65 ~ +175 V mA pF C /W C C NOTES: 1. Measured at 1MHz and applied reverse voltage of 5.0V D.C. 2. Thermal Resistance Junction to Lead. 3. Pulse test: 300us pulse width, 1% duty cycle http://www.SeCoSGmbH.com/ 31-Dec-2010 Rev. D Any changes of specification will not be informed individually. Page 1 of 2 SR5200 Elektronische Bauelemente VOLTAGE 200 V 5.0 Amp Schottky Barrier Rectifiers RATINGS AND CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 31-Dec-2010 Rev. D Any changes of specification will not be informed individually. Page 2 of 2