72512 TKIM/82306/61506VC MSIM TB-00002374 No.8997-1/6
http://onsemi.com
Semiconductor Components Industries, LLC, 2013
September, 2013
SVC704
Varactor Diode
Single Varactor Diode for VCO
16V, 50nA, CR=6.0, rs=0.8Ω, MCPH3
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Features
• High capacitance ratio (VR=1.0 to 7.0V)
•
Small-sized package
•
Low series resistance
Specifi cations
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Reverse Voltage VR16 V
Junction Temperature Tj 150 °C
Storage Temperature Tstg --55 to +150 °C
Package Dimensions
unit : mm (typ)
7019A-001
Ordering number : EN8997A
Product & Package Information
• Package : MCPH3
• JEITA, JEDEC : SC-70, SOT-323
• Minimum Packing Quantity : 3,000 pcs./reel
Packing Type : TL Marking
Electrical Connection
1 : Anode
2 : No Contact
3 : Cathode
MCPH3
0.250.25
0.07
2.1
1.6
2.0
0.65 0.3
0.85
0.15
12
3
0 to 0.02
V5
LOT No.
LOT No.
TL
SVC704-TL-E
3
12
SVC704
No.8997-2/6
Electrical Characteristics at Ta=25°C
Parameter Symbol Conditions Ratings Unit
min typ max
Breakdown Voltage V(BR)R IR=10μA16V
Reverse Current IRVR=10V 50 nA
Interterminal Capacitance*
C1.0V VR=1.0V, f=1MHz 26.0 30.0 pF
C7.0V VR=7.0V, f=1MHz 3.4 4.6 pF
Series Resistance rsVR=1.0V, f=470MHz
0.8
Ω
Capacitance Ratio CR C1.0V / C7.0V 6.0
Ordering Information
Device Package Shipping memo
SVC704-TL-E MCPH3 3,000pcs./reel Pb Free
Interterminal Capacitance, C -- pF
Rev erse Voltage, VR -- V
C, Q -- VR
Qualit
y
Factor, Q
0123468
57910
1000
100
10
7
5
3
2
7
5
3
2
7
5
3
2
1.0
1000
100
10
7
5
3
2
7
5
3
2
7
5
3
2
1.0
IT10665
VRF=20mVrms
Quality Factor, Q
f=470MHz
Interterminal Capacitance, C f=1MHz
SVC704
No.8997-3/6
VR=1.0V
2.5V
4.0V
7.0V
VR=7.0V
4.0V
2.5V
1.0V
IT10666
--50 --25 0 25 50 75 100 150125
0.90
0.92
0.94
0.96
0.98
1.00
1.02
1.04
1.06
1.08
1.10
1.12
1.14
1.16
1.18
1.20 C -- Ta
Capacitance Ratio
Ambient Temperature, Ta -- °C
VRF=20mVrms
f=1MHz
SVC704
No.8997-4/6
Taping Specifi cation
SVC704-TL-E
SVC704
No.8997-5/6
Outline Drawing Land Pattern Example
SVC704-TL-E
Mass (g) Unit
0.007
* For reference
mm Unit: mm
0.65 0.65
0.4
2.1
0.6
SVC704
PS No.8997-6/6
ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at
www.onsemi.com/site/pdf/Patent-Marking.pdf.
SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no
warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the
application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental
damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual
performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical
experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use
as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in
which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for
any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors
harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or
death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the
part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
